Hooking Up The Unit; Revolving The Lcd Panel; Selecting The Operation Mode - LG DP371B Manual

Table of Contents

Enlarged version

Hooking up the unit

Audio and Video Connection

Connect the AV OUT jack on the unit to the corresponding input jacks on your

TV using the supplied AV cable as shown below.

Manufactured under license from Dolby Laboratories. "Dolby" and the

double-D symbol are trademarks of Dolby Laboratories.

DP372B-P_AGBRLLK_ENG_MFL567328167 7

You can revolve the LCD panel of the unit clockwise a maximum of 180

degrees for use. You can also operate the unit after revolving the LCD panel

180 degrees and folding it back down.

Right side of the unit

To revolve the LCD panel, place the unit on a stable and even surface such

as on a table. Push the LCD panel up and then lift it into a vertical position.

Plug into the

Revolve the LCD panel clockwise slowly 180 degrees. If you need, fold the

"AV OUT" jack.

LCD panel after revolving it.

To revolve the LCD panel to its original position, open the LCD panel to a verti-

cal position. Revolve the LCD panel counter clockwise slowly 180 degrees.

• When finished using the unit, return the LCD panel to its original position.

• Do not leave the LCD panel in the face-up position, or sudden shocks may

damage it.

• Select [DISC] to playback the inserted disc.

• Select [USB] to playback the file(s) in the connected USB Flash Drive.

You need to select a operation mode before using this

unit. Press MODE on the unit and the operation mode

selection menu appears. Use b / B to select a mode

then press ENTER.

8/19/08 2:36:22 PM

Table of Contents