Livin Lite Recreational Vehicles Owner's Manual page 43

The screen door can be adjusted to sit flush
in the door jam. This requires two separate
adjustments to be performed. The first
adjustment made is at the screen door latch/
catch itself. Loosen the two screws holding the
latch to the door to permit vertical adjustment.
Move the latch far enough to catch on the
striker mounted at the door frame. Tighten
both screws.. The striker mount on the door
frame permits horizontal adjustment. Again,
loosen the two screws holding the striker
assembly. Move the striker to center the latch
and tighten the screws in place.
It is a simple procedure to replace the sliding
cover. Place the slider in the center. Pull from
the center of the slider, it will bow enough to
allow easy removal. To re-install, reverse this
procedure. Install the upper left corner first
and pay attention to the location of the stop
tabs.
43
www.LivinLite.com