Table of Contents Safety Precautions ....................... 1. Important Safety Instructions ..................2. Notice ........................Before You Begin ......................1. Main Features ......................2. Accessories ......................Hardware Description ....................1. Front Panel Configuration ..................2. Rear Panel Configuration ..................3. Remote Control Unit ....................Connections Diagram ....................
Safety Precautions SAFETY PRECAUTIONS 1. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
Safety Precautions 2. NOTICE 1. These serving instructions are for use by qualified service personnel only to reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. 2.
Before You Begin BEFORE YOU BEGIN 1. MAIN FEATURES - USB 2.0 Host Support(MP3 Player & JPEG Viewer) - MPEG-II Digital & Fully DVB Compliant - Blind Scan - Multi-LNB Controlled by DiSEqC Control Version 1.0, 1.2 and USALS - Multi-Satellite Search - Support EPG(Electronic Program Guide) - On-Screen Display with 65535 Color Full Resolution - Favorite Channel Groups...
HARDWARE DESCRIPTION 1. FRONT PANEL CONFIGURATION STANBY REMOTE DVB4600 DIGITAL SATELLITE RECEIVER 1. POWER Button: Press to switch between STANDBY and POWER ON modes. 2. CH Up/Down Button: Press to change services in normal mode, to move the highlighted-bar UP/DOWN in menu mode.
Hardware Description 2. REAR PANEL CONFIGURATION 1. LNB IN: Use to connect a satellite antenna. 2. LNB OUT: Use it when connecting to another STB for loop-through. 3. AUDIO L/R: Use to connect audio left, right of TV or VCR. 4.
Hardware Description 3. REMOTE CONTROL UNIT 1. POWER: Turns the STB On/Off. 2. MUTE: Turns the sound On/Off. 3. UHF: To adjust UHF Service. 4. SLEEP: To adjust sleep timer. 5. TV/SAT: Toggles the TV output source between the satellite input and UHF/VHF antenna input. 6.
Connections Diagram CONNECTIONS DIAGRAM 1. CONNECTING TO TV 1. Connect the TV antenna to RF IN. 2. Connect the RF OUT to RF IN of TV. 3. Connect the VIDEO and AUDIO L, R to VIDEO IN and AUDIO L, R IN of TV. 4.
Connections Diagram 2. CONNECTING TO TV AND VCR 1. Connect the TV antenna to RF IN. 2. Connect the RF OUT to RF IN of VCR. 3. Connect RF OUT of VCR to RF IN of TV. 4. Connect the TV SCART to SCART of TV. 5.
Connections Diagram 3. CONNECTING TO DIGITAL AUDIO EQUIPMENT 1. To get better quality audio, you can use digital audio via coaxial cable. If you have a digital audio equipment, connect SPDIF to Digital audio input of the equipment. 2. Connect other jacks to the appropriate jacks of TV or VCR refers to above sections, 1. Connecting to TV and 2.
Page 12
Connections Diagram 2. Using DiSEqC switch: Connect the cable of DiSEqC switch to LNB IN. DISH DISH DISH DISH DiSEqC switch 3. Using DiSEqC motor: Connect the cable of DiSEqC motor to LNB IN. Satellite DISH With DiSEqC motor...
Guide of Functions GUIDE OF FUNCTIONS 1. SELECT SERVICES To select the desired service, you can use below methods. 1.1 Using UP/DOWN buttons You can navigate between services using UP/DOWN buttons. Whenever you press the UP(DOWN) button, current service will be changed to next(previous) service. You have to press UP or DOWN button until find the service you want.
Guide of Fuctions Press INFO button once more, you can get more detailed information. 3. MULTI PICTURE DISPLAY Press the BLUE button to display multiple pictures and RED button display 9 or 12 multiple pictures option. 4. ELECTRONIC PROGRAM GUIDE (EPG) Electronic Program Guide (EPG) helps you navigate through all the possible viewing options.
Guide of Fuctions 5. Select the program by using the ARROW buttons then set the timer by pressing OK. 5. SATELLITE LIST Select the SAT (satellite) button to view all satellite listings. Scroll through the various satellites using the ARROW buttons, and select the appropriate satellite by pressing OK. 6.
Guide of Main Menu GUIDE OF MAIN MENU To display the menu, press MENU button at any time. You can select the sub menu using ARROW buttons. The selected sub menu becomes highlighted. When you have selected the sub menu you want, press the OK button.
Page 17
Guide of Main Menu 1.2. Timer Manager Current time is based on the TDT (Time Description Table) in the satellite signal for the current program. Press GREEN button to set the current time, Press RED button to cancel out the set time. To change set time from current program, press OK button to make change.
Page 18
Guide of Main Menu 1.4. Parental Control Access to services and programs is controlled by a 4-digit secret code that is defined by the user. Whenever you attempt to access parental control menu, the pop-up window will instruct you to input a PIN code.(If necessary, you can change it.) NOTE: THE DEFAULT PIN CODE IS ‘0000’.
Guide of Main Menu 1.6. A/V Output Setting 1. TV Type: Select the TV types.(PAL/NTSC/Auto) In Auto mode, the STB is automatically selected as NTSC or PAL according to the service played. 2. TV Aspect Ratio: Select the aspect ratio of TV which is connected to STB.(4:3/16:9) - Display Format: Select the format which the video is to be displayed on screen.
Page 20
Guide of Main Menu - When you select Universal in LNB type, both 9750 and 10600 are supported at the same time. And LNB 22KHz setting is disabled. 6. LNB 22 KHz: When you use a dual LNB or two antennas connected to a 22 KHz tone switch box, make 22 KHz tone switch enable or disable to select LNB or antenna.
Page 21
Guide of Main Menu Using USALS - Tracking Step: Select the tracking step. - Move: To move the dish, press LEFT/RIGHT button. - Dish Longitude: Enter the longitude using the NUMERIC buttons. - Dish Latitude: Enter the latitude using the NUMERIC buttons. - Go To: Press OK button to rotate the dish to the configured position.
Page 22
Guide of Main Menu Blind Search Mode - Frequency: Set Auto to search whole frequency, Set Manual to search only desired frequency. - Polarity: Select the Horizontal or vertical polarization you wish to search. - Search Type: Select the search type. - Start Search: Press OK button to start search.
Page 23
Guide of Main Menu Advanced Search Mode - Frequency: Select the frequency from the list to search. - Symbol rate: Enter the symbol rate using the NUMERIC buttons. - Polarity: Select the polarity.(Vertical/Horizontal) - Video PID: Enter the video PID using the NUMERIC buttons. - Audio PID: Enter the audio PID using the NUMERIC buttons.
Guide of Main Menu 3. UTILITIES 3.1. MP3 Player Stick the external USB memory into the provided USB port on front panel. Once inserted, press OK button to read external USB memory stick and choose the MP3 file from the window you want to play.
Guide of Main Menu 3.4. Calculator To use a calculator, press OK button. 4. SERVICE LIST 4.1. Service List Manager Service List Manager menu will be appeared when press OK button. You can select Edit Mode by press YELLOW button. 1.
Page 26
Guide of Main Menu 3. Delete Services: All service lists will be shown on left side of window. By using ARROW and OK button you may select services to be delete. And press GREEN button to delete the selected services. 4.
Page 27
Guide of Main Menu 4.2. Service List Option 1. Service List Preview: Setting ‘ON’: Service will be played when press ‘OK’ by moving from the Service List to other service. To erase Service List on screen, press ‘OK’ one more time. Setting ‘OFF’: Service will be played when press ‘OK’...
Troubleshooting PROBLEM SOLUTION Does not display any message on the - Check the main power cable and check that it is plugged into front panel. a suitable power outlet. - Check you have switch the STB main power switch ON at the rear of the STB.
Specifications Tuner & Channel Decoder Input Connector F-type, IEC 169-24, Female Loop through out F-type, IEC 169-24, Female Frequency Range 950MHz ~ 2150MHz Input Impedance 75Ω, unbalanced Signal Level -65 to -25dBm LNB Power 13/18VDC, max.400mA 22KHz Tone (22±2)KHz, (0.6±0.2)V DISEqC Control V1.0/1.2/USALS Compatible Demodulation...
Page 30
Specifications Front Panel Slot 1 USB Host Slot Buttons 3 Buttons (CH UP/DOWN, STANDBY) Display 7-Segment (Channel No. or Time) Indicators 2 LEDs (STANDBY, REMOTE) Smart Card Reader CONAX Compatible Power Supply Input Voltage AC 100 ~ 250V, 50/60Hz Type SMPS Power Consumption Max.