Rosewill RCR-FD200 User Manual
Rosewill RCR-FD200 User Manual

Rosewill RCR-FD200 User Manual

7-in-1 internal card reader with floppy drive

Advertisement

7-in-1 Internal Card Reader with Floppy Drive
RCR-FD200
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RCR-FD200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Rosewill RCR-FD200

  • Page 1 7-in-1 Internal Card Reader with Floppy Drive RCR-FD200 User Manual...
  • Page 2 LED indicator -Red: there will two situation with RED LED *When the RCR-FD200 are connected successfully, the RED LED will be on until it is fully recognized by the computer * The RED LED will be on when the floppy drive is inserted -Green: * The GREEN LED will be on when the memory card is inserted.
  • Page 3 Unscrew to open one cover of the desktop. Insert the drive into the 3 1/2” bay Connect the USB2.0 cable from the RCR-FD200 to the motherboard CAUTION: Please refer to your motherboard manual for the USB header pin assignment information.
  • Page 4 Double Click on SETUP.exe, it will automatically install the driver. Once the installation is completed, please restart your computer Thank you for purchasing a quality Rosewill Product. Please register your product at : www.rosewill.com for complete warranty information and future support for your product.

Table of Contents