4 Play
Play from a Bluetooth device
You can listen to a Buetooth device through this
speaker.
Note
•
The effective operation range between the speaker
and your Bluetooth device is approximately 10 meters
(30 feet).
1
Switch ON/OFF to turn on the speaker.
2
Press and hold
activate Bluetooth function on the speaker.
» The Bluetooth indicator flashes.
3
Activate the Bluetooth function in your
Bluetooth device (see the device user
manual).
4
Select "PHILIPS SBT300" on your device
for pairing.
» The speaker gives out 2 beeps and the
Bluetooth indicator stays steadily on.
• For elder devices, you need to input
"0000" as pairing password.
5
Start music play on your Bluetooth device .
3 sec.
PHILIPS SBT300
6
EN
for 3 seconds to
PIN
0000
Play from a PC
You can also listen to audio through Bluetooth
in PC.
Note
•
Make sure that you have installed Bluetooth driver in
your PC before pairing.
•
The steps below are only for windows 7 operating
system. If you use other OS/IOS , refer to other OS/
IOS help.
1
Switch ON/OFF to turn on the speaker.
2
Press and hold
activate Bluetooth function on the speaker
» The Bluetooth indicator flashes.
3
Activate the Bluetooth function in your PC.
4
Add a Bluetooth device in your PC and
select "PHILIPS SBT300" for pairing.
» The speaker gives out 2 beeps and the
Bluetooth indicator steadily on.
5
Set "PHILIPS SBT300" as default
communication device in your PC.
1). Right click the speaker icon (
the lower right corner of the Windows
home screen and select "Playback Devices"
from the option menu
2). Right click desired speaker and select
"Set as Default communnication Device".
6
Start music play on your PC .
for 3 seconds to
) in