Other Functions; Headphone Monitor; Digital Output; Key Hold - HHB Portadisc MDP500 Operating Instructions Manual

HEADPHONE MONITOR

1. Press the SYSTEM button until 'HEADPHONE
MONITOR' is recalled.
HEADPHONE MONITOR
STEREO SET
2. Press F1 to select from 'STEREO', 'MONO-L',
'MONO-R' or 'BOTH' and then press F2 to confirm.
Press F3 to exit.

DIGITAL OUTPUT

The digital output on the PORTADISC can be switched
off, preventing digital howlround when connected in a
loop with other digital equipment.
1. Press the SYSTEM button until 'DIGITAL OUTPUT?'
is recalled.
DIGITAL OUTPUT ?
OFF SET
2. Press F1 to select either 'OFF' or 'ON' and then
press F2 to confirm. Press F3 to exit.

KEY HOLD

This facility is provided to avoid any accidental operation
during recording. Each time you press the button for
more than two seconds, the hold function changes from
'Key Hold ON' to 'Key Hold OFF' and vice versa. The
following buttons can still operate even when the keyhold
function is on: KEY HOLD, LIGHT, MARK, DISPLAY and
POWER. The remote control connection will not be
affected by this function; i.e., it is always enabled.

COPY PROTECTION

The PORTADISC uses the Serial Copy Management
System (SCMS), which only allows first generation
digital copies of audio via the optical and coaxial digital
inputs.
24

OTHER FUNCTIONS

PORTADISC MDP500 MiniDisc Recorder
EXIT
EXIT