Display Back Light; Preparation; Display Contrast - HHB Portadisc MDP500 Operating Instructions Manual

DISPLAY BACK LIGHT

Press LIGHT to turn on the display back light for 5
seconds or, if you press and hold the LIGHT button, the
light will stay on permanently.
NOTE – We recommend minimal use of the display light
when the PORTADISC is powered by batteries. This will
maximise battery life.

DISPLAY CONTRAST

1. Press SETUP until 'DISPLAY CONTRAST' is
displayed.
DISPLAY CONTRAST
+3 SET
2. Press F1 to choose the setting you want from '+1',
'+2', '+3', '+4' and '+5' (5 is the darkest).
3. Press the F2 button to confirm and then press F3
to exit this page.
14

PREPARATION

PORTADISC MDP500 MiniDisc Recorder
EXIT
cont.