LG LCD TV / LED LCD TV /PLASMA TV Owner's Manual page 113

17. ISM Method (Command: j p) (Only Plasma TV)
► To control the ISM method. You can also adjust ISM
Method in OPTION menu.
Transmission [j][p][ ][Set ID][ ][Data][Cr]
Data 02: Orbiter
04: White wash
08: Normal
20: Colour Wash
Ack [p][ ][Set ID][ ][OK/NG][Data][x]
18. Energy Saving (Command: j q)
► To reduce the power consumption of the TV. You can also
adjust Energy Saving in PICTURE menu.
Transmission [j][q][ ][Set ID][ ][Data][Cr]
Power Saving
Function
7 6 5 4
Low
0 0 0 0
Power
Low
0 0 0 0
Power
Low
0 0 0 0
Power
Low
0 0 0 0
Power
Low
0 0 0 0
Power
Low
0 0 0 0
Power
Low
0 0 0 0
Power
Ack [q][ ][Set ID][ ][OK/NG][Data][x]
19. Auto Configure(Command: j u)
► To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Data 01: To set
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
Level
Description
3 2 1 0
0 0 0 0 Off
0 0 0 1 Minimum
0 0 1 0 Medium
0 0 1 1 Maximum
0 1 0 1 Screen Off
Intelligent
Sensor
0 1 0 0
(Only
Plasma TV)
Auto
(Only LCD /LED
0 1 0 0
LCD TV -
Depending on
models)
EXTERNAL CONTROL DEVICE SETUP
20. Tune Command (Command: m a)
► Select channel to following physical number.
Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr]
Data00 : High channel data
Data01 : Low channel data
ex. No. 47 -> 00 2F (2FH)
No. 394 -> 01 8A (18AH),
DTV No. 0 -> Don't care
Data02 : 0x00 : Analogue Main
0x10 : DTV Main
0x20 : Radio
Channel data range
Analogue - Min: 00 to Max: 63 (0 to 99)
Digital - Min: 00 to Max: 3E7 (0 to 999)
(Except For Sweden, Finland, Norway, Denmark,
Ireland)
Digital - Min: 00 to Max: 270F (0 to 9999)
(Only Sweden, Finland, Norway, Denmark, Ireland)
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
Data Min: 00 to Max: 7DH
21. Programme Add/Skip(Command: m b)
► To set skip status for the current Programme.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Skip 01 : Add
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
22. Key(Command: m c)
► To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data Key code - Refer to page 107.
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
23. Control Back Light (Command: m g)
(Only LCD TV/LED LCD TV)
► To Control the back light.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data : data Min: 00 to Max: 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
113