LG LED LCD TV Owner's Manual page 12

12
ASSEMBLING AND PREPARING
Securing the TV to a table
Image shown may differ from your TV.
y
(Only 32/37/42/47LV35**)
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
Mount the TV on a table, and then insert and
tighten the supplied screw on the rear of the stand.
4-Screws
(not provided as parts of the product)
Stand
NOTE
Screws: M5 x L (*L: Table depth + 8-10 mm)
y
ex) Table depth: 15mm, Screw: M5 x 25
(Only 32/37LV35**)
AC IN
1-Screw ( provided as parts of the product)
Stand
Desk
WARNING
To prevent TV from falling over, the TV
y
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause
injury.
Desk
CABLE MANAGEMENT
Securing the TV to a wall
Image shown may differ from your TV.
y
1
Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2
Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
Make sure that children do not climb on
y
or hang on the TV.
NOTE
Use a platform or cabinet that is strong
y
and large enough to support the TV
securely.