LG 42PM4M Owner's Manual page 36

External Control Device Setup
14. Balance (Command2:t)
G To adjust balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
•
Refer to 'Real data mapping 1'. See page 35.
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Data Min: 0 ~ Max: 64
* Balance : L50 ~ R50
15. Colour Temperature (Command2:u)
G To adjust colour temperature.
You can also adjust ACC in the Picture menu.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0: Normal 1: Cool
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
Data 0: Normal 1: Cool
16. Abnormal state (Command2 : z)
G Abnormal State : Used to Read the power off status
when Stand-by mode.
Transmission
[k][z][ ][Set ID][ ][Data][Cr]
Data FF : Read
0 : Normal (Power on and signal exist)
1: No signal (Power on)
2 : Turn the monitor off by remote control
3 : Turn the monitor off by sleep time function
4 : Turn the monitor off by RS-232C function
6 : AC down
8 : Turn the monitor off by off time function
9 : Turn the monitor off by auto off function
Acknowledgement
[z][ ][Set ID][ ][OK][Data][x]
17. ISM mode(Command: j p)
G Used to select the afterimage preventing function.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data 1 : Inversion
2 : Orbiter
3 : Orb.+Inv.
4 : White Wash
8 : Normal
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
36 Plasma Monitor
2: Warm 3: User
2: Warm 3: User
18. Auto Configure (Command: j u)
G To adjust picture position and minimize image shaking
automatically. Auto Configure only works in RGB-PC
mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 1: To set
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
19. Key (Command: m c)
G To adjust Key code for IR remote control.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data Key code : Refer to See page 39.
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
20. Tile Mode(Command : d d)
G Change a Tile Mode.
Transmission
[d][d][ ][Set ID][ ][Data][x]
Data
00
12 1 x 2 mode(column x row)
13
14
...
44
* The data can not be set to 0X or X0 except 00.
Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
Description
Tile mode is off.
1 x 3 mode
1 x 4 mode
...
4 x 4 mode