Cleaning And Maintenance - Oregon Scientific Accelerator Power Desktop Instruction

BD18-Manual (AU) 1/18/06 11:47
Storage & Care
The mouse can be docked in the rear of the unit, and the cord can be stored away on the
underside of the unit, allowing for easy transport of the Accelerator Power Desktop when
you're on the move.
1. Turn OFF the unit.
2. Dock the mouse in the back of the unit, taking care to pull the cord through on the underside.
3. Thread the mouse cord around the edge of the base bottom.
Cleaning the Mouse
Turn the mouse upside down and unscrew the small screw to open the cover.
Take the ball out, and wipe the ball and the inside compartment with a dry cloth. Replace the cover.

Cleaning and Maintenance

The unit should be regularly examined for damage to the enclosure and other parts. In the event of such damage the
unit must not be used until the damage has been repaired. Always remove the batteries before cleaning. Wipe the
unit with a dry cloth.
• Do not get the unit wet.
• Do not dismantle the unit.
Starting your Accelerator Power Desktop
1. Unfold the keyboard.
2. The screen part can tilt forwards and back.
3. Turn on the Accelerator Power Desktop by pushing the
right of the keyboard.
4. Remember to turn the unit off when you have finished by pushing the same button.
5. Fold up the keyboard
Page 9
button at the top
5