Oregon Scientific Accelerator Vision Instruction page 19

File menu
Start a new document:
Select "New" from the File menu or press [ Ctrl ] + [ N ].
Open an existing/saved document:
1. Select "Open" from the File menu or press [ Ctrl ] + [ O ]. A list of documents are shown.
2. Select the document you wish to open by clicking on the document name.
Save a document:
Remember to save your document and any changes made so you can continue working on the latest
document in the future.
1. Select "Save" from the File menu or press [ Ctrl ] + [ S ].
2. Click on [ Save ] or press [ Enter ].
To delete a document:
If you no longer need a file, remove it from the Accelerator Vision's memory. This releases more memory
to save other files.
1. Open the document you want to remove.
2. Select "Delete" from the File menu or press [ Ctrl ] + [ D ].
3. A dialogue box appears asking you to confirm the deletion.
Click on [ OK ] to confirm, or [ Cancel ] or escape icon to cancel the delete command.
Please note that the Accelerator Vision can store a maximum of twenty-four documents depending on the file
size of each.
Print:
Select "Print" to print out the current document. Remember to check that the:
1. Printer is connected to your PC and the power is on.
2. The X-Cable is attached to your PC.
Exit:
Selecting this option closes the Word Processor and returns you to the Tool Zone menu.
Scoreboard
Use the pull-down menu to see either Personal Best scores or Challenge Game scores.
The scores of each game are listed in the score display field. Scroll down to see all
the scores. Then you can:
1. Click on [ Print ] to print out the current scores in the display field, or
2. Click on [ Clear ] to clear the Personal Best list if the list is displayed.
World Time
Check the current time around the world. Select the country where you want to learn
the time. You can select up to four different countries at a time.
Alarm Clock
The alarm can be turned off by pressing any key on the keyboard.
1 Click on the alarm sound menu and select a sound.
2. Activate the alarm by clicking on the alarm field so "On" is displayed.
Deactivate the alarm by clicking on the alarm field so "Off" is displayed.
3. Set the alarm time by clicking on the time display. The hour component begins to flash.
Set the hour of the alarm using the up/down arrow keys. Remember to specify
am or pm. Move to minutes by pressing the left/right arrow keys then change the minutes using
the up/down arrow keys.
33
34