Using The Computer; Signal Cable - LG W1942PM User Manual

Connecting the Display

Using the Computer

1.
Make sure to turn off the computer and product. Connect the cable as below sketch map
form to
1
A
Connect DVI Cable
B
Connect Dsub Cable (PC)
C Connect Dsub Cable (Mac)
D Connect Audio Cable
Power Cord Power Cord
2.
Press
power on. When monitor power is turned on, the
'Self Image Setting Function' is executed automatically.
(Only Analog Mode)
NOTE
' Self Image Setting Function'? This function provides the user with optimal display settings.When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual
input signals.
'AUTO/SET' Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted
screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve
resolution.
.
2
NOTE E NOT
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as
shown.
User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with
ferrite cores to maintain standard compliance for the product.
2
Wall-outlet type
For Apple Macintosh use, a separate plug adapter is needed
to change the 15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2 row connector.
button on the front switch panel to turn the
1

Signal Cable

Signal Cable
Varies according to model.
DVI-D(This feature is not
available in all countries.)
M M a a c c a a d d a a p p t t e e r r
A7
P P C C
P P C C
P P C C
MAC C MA