LG HB954TBW User Manual page 15

HB954TBW-DD.BFRALL_ENG_8662
Setting up
Be careful of the following
• Be careful to make sure children do not put their hands or any objects into
the *speaker duct.
*Speaker duct: A holl for plentiful bass sound on speaker cabinet(enclosure).
• Set the distance between this unit and Wireless Receiver within 10m.
• Optimum performance can be implemented only when the Wireless
Transmitter and the Wireless Receiver within distance of 2m to 10m is used
since communication failure may occur if longer distance is used.
• Be sure to match the speaker cable to the appropriate terminal on the com-
ponents: + to + and – to –. If the cables are reversed, the sound will be dis-
torted and will lack bass.
• It takes a few seconds (and may take longer) for the Wireless Transmitter and
Wireless Receiver to communicate with each other.
• Use the rear speaker at least 30 CM away from either TV screen or PC mon-
itor
8/19/09 6:04 PM Page 15
About Ferrite Core (for EMI only)
Be sure to attach the ferrite core to the speaker cable (for connecting to
this unit and wireless receiver).
This ferrite core can reduce noises.
How to attach the ferrite core
1 Press the stopper [a] of the ferrite
core to open.
2 Wind the speaker cables once on
the ferrite core. (Refer to the fig.3
and comment.).
3 Close the ferrite core until it clicks.
Rear of wireless
receiver
(fig.3)
The length
here is as
short as
possible.
15