1. Manuals
  2. Brands
  3. Acard Manuals
  4. DVD Recorder
  5. ARS-2032D ARS-2034D
  6. User manual

Acard ARS-2030D User Manual

Dvd standalone dvd link host
Hide thumbs
Table of Contents

Advertisement

Quick Links

ARS-2030D/2030DS
ARS-2032D/2034D
Copy Smart Plus
DVD Standalone
DVD Link Host
User's Manual
ARS-2030D/DS
1-to-3
ARS-2034D
ARS-2032D
1-to-7
1-to-14
Ver: 1.0
Copyright ©2002 ACARD Technology Corp.
Release: July 2002

Advertisement

Table of Contents
loading

Summary of Contents for Acard ARS-2030D

  • Page 1 ARS-2030D/2030DS ARS-2032D/2034D Copy Smart Plus DVD Standalone DVD Link Host User’s Manual ARS-2030D/DS 1-to-3 ARS-2034D ARS-2032D 1-to-7 1-to-14 Ver: 1.0 Copyright ©2002 ACARD Technology Corp. Release: July 2002...

  • Page 2: Copyright And Trademark

    ACARD’s ARS-2030D/DS/2032D/2034D Copy Smart Plus are merely used for copy- ing and editing personal audio and video data. Violating Copy Right is a criminal act. ACARD's Copy Smart Plus only supports legal backup operation.

  • Page 3: Table Of Contents

    Table of Contents Chapter 1 Introduction ............6 1.1 Features ....................6 1.2 Specification ..................6 Chapter 2 Installation ............8 2.1 Copy Smart Plus Only ............... 8 2.2 A Whole System................. 8 2.3 A System without DVD Writers ............8 Chapter 3 Basic Instructions ..........
  • Page 4 5.9.5 Select Partition ................31 5.9.6 Select Src Drive ................31 5.10 Edit Track (for CD only) ............... 32 5.10.1 CD to CD ..................33 5.10.2 CD to HDD ................... 37 5.10.3 Play Audio Track ................. 42 5.10.4 Close Session ................43 5.11 Setup ....................
  • Page 5 5.12.5 Verify HDD ................... 57 5.12.6 Burn-in ..................58 5.12.7 Update Firmware ................. 59 5.12.8 Compare Firmware ..............60 5.12.9 H/W Diagnostic ................60 5.12.10 Load Default ................61 5.12.11 CD+G ..................62 5.12.12 ISRC.................... 62 5.12.13 Switch Link-Host ............... 63 Chapter 6 Troubleshooting ..........

  • Page 6: Chapter 1 Introduction

    As for ARS-2032D and ARS-2034D, they are all standalone. The four models are designed for copying DVD in video, audio or data form. ARS-2030D/ 2030DS is for 3 DVD writers, ARS-2032D for 7 ones and ARS-2034D for 14 ones.
  • Page 7 (12cm, DS/L), DVD-RAM 2.0 (8cm, DS/SL), DVD-ROM (12cm, SS/SL), DVD-ROM(8cm, SS/SL) *SS/DS means single side/double side; SL/DL/ML means single layer/double layer/mixed layer Supported DVD-ROM: LiteOn Supported DVD Writers: Panasonic, Pioneer, RICOH Please visit the website of ACARD to get the newest data. http://www.acard.com...

  • Page 8: Chapter 2 Installation

    ARS-2030D/2030DS Manual Chapter 2 Installation Before installing your copy smart plus, please note that there are three kinds of packages: the copy smart plus only, a whole copying system and a system without DVD writers. 2.1 Copy Smart Plus Only Unpack the package.
  • Page 9 ARS-2030D/2030DS Manual Hardware Connection of ARS-2030D/2030DS with a HDD The hard disk must be connected to IDE 0 port and in Master mode. DVD-ROM must be in Slave mode. Hardware Connection of ARS-2030D/2030DS without a HDD...
  • Page 10 ARS-2030D/2030DS Manual Hardware Connection of ARS-2032D (1) The hard disk must be connected to IDE 0 port and in Master mode. DVD-ROM must be in Slave mode. Hardware Connection of ARS-2032D (2)
  • Page 11 ARS-2030D/2030DS Manual Hardware Connection of ARS-2034D...

  • Page 12: Chapter 3 Basic Instructions

    Duplicator Initialize SDRAM ver: 2.03K Figure 1 represents ARS-2030D/2030DS. The firmware version for 1-7 ARS-2032D is 2.03S and that for 1-14 ARS-2034D is 2.03X. Figures below all represent ARS- 2030D/2030DS, but you can substitute them with the other two models.

  • Page 13: About Hdd Installation

    ARS-2030D/2030DS Manual 1. Copy Detect Drives There are 12 functions for you to use. Function 1 is Copy. You can press to select other functions. 3.2 About HDD Installation HDD installation is not necessary, but with a hard disk you can use and enjoy the function of Image.

  • Page 14: Without A Hdd

    ARS-2030D/2030DS Manual When copying comes to an end, the passed DVDs will eject automatically. The default is eject automatically, but you can change it. The failed DVDs will remain in the writers. The default is keeping failed DVDs in the writers, but you can change it. To take the failed DVDs you need to press the buttons on the writers.
  • Page 15 ARS-2030D/2030DS Manual Please identify two different cables before hardware installation. 1. Three connectors for DVD-ROM or optional HDD Connect to ARS-2030D/ Connect to IDE 2032D/ 2034D IDE ports Connect to IDE hard DVD-ROM drive drive (Master) (Slave) 2. Two connectors for DVD writers...

  • Page 16: Chapter 4 Board Layout

    ARS-2030D/2030DS Manual Chapter 4 Board Layout The board layout of ARS-2030D/2030DS is shown as follows. **Remark: In the picture IDE devices are CD-R/RWs, but you certainly can substitute them with DVD writers. The same rule can be applied to 2032D and 2034D, too.
  • Page 17 ARS-2030D/2030DS Manual The board layout of ARS-2032D is shown as follows. Host Made Target Made...
  • Page 18 ARS-2030D/2030DS Manual The board layout of ARS-2034D is shown as follows. Host Made Target Made Target Made Target Made...

  • Page 19: Chapter 5 Functions

    ARS-2030D/2030DS Manual Chapter 5 Functions There are 12 functions: Copy, Test, Test & Copy, Verify, Compare, Prescan, Disc Info, Select Source, Image, Edit Track, Setup and Advanced Setup. Among the 12 functions, Edit Track is designed exclusively for editing a collection of favorite songs from CDs.

  • Page 20: Test

    ARS-2030D/2030DS Manual When copying is in progress, MB and time will decrease whereas the percentage of completion increase. When copying comes to an end, LCD will show the results as follows. The passed DVDs will eject automatically. 1.Copy OK: 03 5.2 Test...

  • Page 21: Test & Copy

    ARS-2030D/2030DS Manual LCD will show the testing information as follows. Testing- DVD 4213.4MB d:20:15 When the test comes to an end, LCD will show the results as follows. 2.Test OK: 03 Stopping the test halfway does not affect the DVD disks, but if the DVD-rewriteable disks contain important data, they may be destroyed.

  • Page 22: Verify

    ARS-2030D/2030DS Manual When the test finishes, actual copying will begin as shown below. Copying- DVD 0% 4213.4MB d:20:15 When the whole process finishes, LCD will show the results as follows. 3.Test & Copy OK: 03 5.4 Verify Function 4 Verify is to examine if the target DVDs can be read correctly after copying.

  • Page 23: Compare

    ARS-2030D/2030DS Manual When verification comes to an end, LCD will show the results as follows. 4.Verify OK: 03 5.5 Compare Function 5 Compare is to make a comparison between the source DVD and the target DVDs after copying. Select function 5. Put the source DVD onto DVD-ROM and the target DVDs onto DVD writers.

  • Page 24: Prescan

    ARS-2030D/2030DS Manual Press ENT to see the details of source 1 as shown below. Src: 01 DVD-ROM Total: 4213.4MB Press ENT to see the details of source 2. If the comparison is identical, LCD will show the message as follows.

  • Page 25: Disc Info

    ARS-2030D/2030DS Manual Press ENT to prescan. LCD will show the scanning information as follows. Scaning- DVD 0% 4213.4MB 40:40 When scanning finishes, and the source DVD can be read correctly, LCD will show the results as follows. PreScan OK! 5.7 Disc Info Function 7 Disc Info is to show the basic information of source DVD.

  • Page 26: Select Source

    ARS-2030D/2030DS Manual 5.8 Select Source Function 8 Select Source is to let you select the data on DVD-ROM, DVD writers or HDD as the source from which copying will be done. Select function 8. 8.Select Source Press ENT, and then press to select the source as shown below.

  • Page 27: Image

    ARS-2030D/2030DS Manual 5.9 Image Function 9 Image is valid only when you have installed a hard disk. This function includes 6 parts. They are Load, Delete Image, Image Info, Compare Image, Select Partition and Select Src Drive. The loaded data is called an image file.

  • Page 28: Delete Image

    ARS-2030D/2030DS Manual After the image file is successfully loaded, LCD will show the results as follows. Image load OK If there is an image file existing in the current partition, the system will ask you whether to overwrite it or not. Please use to confirm Yes or No.

  • Page 29: Image Info

    ARS-2030D/2030DS Manual After the image file is deleted, LCD will show the results as follows. Partition A: Image is deleted 5.9.3 Image Info This function is to show the basic information of an image file stored in a particular partition. First, select the function by pressing 9-03.Image...
  • Page 30 ARS-2030D/2030DS Manual Press ENT, and LCD will show the comparison information as follows. Compare- DVD 0% 4213.4MB 1:05:06 When comparison comes to an end, LCD will show the results as follows. Compare OK: 1 Fail: 0 Diff: 0 Press ENT to see the details of source 1 as shown below.

  • Page 31: Select Partition

    ARS-2030D/2030DS Manual 5.9.5 Select Partition This function is to select a partition in the hard disk. First, select the function by pressing 9-05.Image P: A Select Partition After installing a hard disk, your copy smart plus will format it automatically. Each partition will occupy 5GB.

  • Page 32: Edit Track (For Cd Only)

    ARS-2030D/2030DS Manual First, select the function by pressing 9-06. Image P: A Image Src Drive Then, use to select DVD-ROM or any of the DVD writers as the source. Select Img Src: 01 IDE1 DVD-ROM After selecting the source such as DVD-ROM, you can press ENT, and LCD will show the message as follows.

  • Page 33: Cd To Cd

    ARS-2030D/2030DS Manual Select function 10. 10. Edit Track 5.10.1 CD to CD On the above figure press ENT, and you will enter the following figure.Here the function CD to CD is to let you select a track or more from CD-ROM, and then copy into blank CD-R/RWs.
  • Page 34 ARS-2030D/2030DS Manual After selecting, please use to move to the “End” menu as shown below. Select Track: End 1Trk03:25 Press ENT to finish the CD editing, and use to confirm Yes or No. End edit disc and burn?Yes LCD will show the copying information as follows.
  • Page 35 ARS-2030D/2030DS Manual The system will ask if you want to keep editing. Please use to confirm Yes or No. as shown below. Continue edit next Disc?Yes If you want to keep editing, the current source CD will eject auctomatically, and the system will ask you to insert another new CD as shown below.
  • Page 36 ARS-2030D/2030DS Manual Press ENT to finish the CD editing, and use to confirm Yes or No. End edit disc and burn?Yes LCD will show the copying information as follows. Copying- 24X Edit 2/10 - > 2/2 On the above figure 2/2 means the second track of all tracks we have selected, and so far we have selected two tracks from two different CDs.

  • Page 37: Cd To Hdd

    ARS-2030D/2030DS Manual On the above figure Press ENT. The system will ask if you want to close all CDs’ sessions. Please use to confirm Yes or No as shown below. Close all disc’s session? Yes After deciding to close, LCD will show the message as follows.
  • Page 38 ARS-2030D/2030DS Manual Suppose we decide to select the first track, then press ENT. A “+” will appear beside 1/10 as shown below. But pressing ENT again may cancel the selection. Select Track: +1/10 03:25 After selecting, please use to move to the “End” menu as shown below.
  • Page 39 ARS-2030D/2030DS Manual The system will ask if you want to keep editing. Please use to confirm Yes or No. as shown below. Continue edit next Disc?Yes If you want to keep editing, the current source CD will eject auctomatically, and the system will ask you to insert another new CD as shown below.
  • Page 40 ARS-2030D/2030DS Manual Then, the track as an image file will be loaded into HDD. LCD will show the loading information as follows. Load- P0 -24X Edit 2/10 - > 2/2 When loading comes to an end, LCD will show the message as follows.
  • Page 41 ARS-2030D/2030DS Manual When burning finishes, LCD will show the results as follows. Burn Complete ! OK: 03 On the above figure press ESC to enter the following figure. Now press to move the data from HDD template into a certain partition.

  • Page 42: Play Audio Track

    ARS-2030D/2030DS Manual If the chosen partition has contained image data, the system will ask to overwrite or keep the data. Here please use to overwrite. Image Exists Overwrite?Yes After pressing , LCD will show the moving information as follows. Moving to P: A When moving finishes, LCD will show the results as follows.

  • Page 43: Close Session

    ARS-2030D/2030DS Manual to select the track you want to play. Select Track: 1/10 03:25 After selecting and pressing ENT, LCD will show the playing information below. Playing Track-1 00:00 / 03:25 5.10.4 Close Session This function is to close CDs and let no data written into. After closing, you can put the CDs on any normal player and listen.

  • Page 44: Setup

    ARS-2030D/2030DS Manual After pressing ENT, LCD will show the message as follows. Closing Session Please wait--- When closing finishes, LCD will show the results as follows. Closing Complete OK :3 Fail :0 5.11 Setup Function 11 Setup lets you change the default settings. Once you change a setting, remember to press ENT to save it.

  • Page 45: Language

    ARS-2030D/2030DS Manual 5.11.1 Language On the above figure press ENT, and you will enter the following figure. The function Language lets you select a language in which messages can be shown on LCD. 11-01. Setup Language Press ENT to enter the following figure. Here LCD only supports English.

  • Page 46: Read Speed

    ARS-2030D/2030DS Manual 5.11.3 Read Speed On the above figure press ESC and to enter the following figure. The function Read Speed lets you control the reading speed of target DVDs. 11-03. Setup Read Speed Press ENT to enter the following figure. The default is maximum, but there are still other choices: 32X, 16X and 8X.

  • Page 47: Startup Menu

    ARS-2030D/2030DS Manual 5.11.5 Startup Menu On the above figure press ESC and to enter the following figure. Startup Menu lets you select any one of the functions except Adv Setup as the first item appearing on the menu whenever you turn on the copy smart plus.

  • Page 48: Auto Compare

    ARS-2030D/2030DS Manual 5.11.7 Auto Compare On the above figure press ESC and to enter the following figure. Auto Compare is to compare automatically the source DVD and the target DVDs after copying. 11-07. Setup Auto Compare Press ENT to enter the following figure. The default is Off. Press to select On.

  • Page 49: Eject Disc

    ARS-2030D/2030DS Manual 5.11.9 Eject Disc On the above figure press ESC and to enter the following figure. Eject Disc provides three choices. They are Eject Good Only, Eject All Disc, and Do Not Eject. Eject Good Only means that the DVDs will eject automatically only when they are copied successfully.

  • Page 50: Burn Mode

    ARS-2030D/2030DS Manual Press ENT to enter the following figure. The default is On. Press to select Off. Burn On The Fly If your copy smart plus doesn’t connect with a hard disk, LCD will show the message as follows. No Valid HDD ! 5.11.11 Burn Mode...

  • Page 51: Button Sound

    ARS-2030D/2030DS Manual 5.11.12 Button Sound On the above figure press ESC and to enter the following figure. Button Sound lets you control the sound of a button when you press it. 11-12. Setup Button Sound Press ENT to enter the next figure. The default is On. Press to select Off.

  • Page 52: System Info

    ARS-2030D/2030DS Manual Press ENT to enter the next figure. DVD-ROM DVD-116 1.22 Press twice to enter the next figure. 02 IDE2 Master DVD-RW : PIONEER Press ENT to enter the next figure. DVD-RW DVR-103 1.80 5.11.14 System Info On the above figure press ESC and to enter the following figure.

  • Page 53: Quick Erase

    ARS-2030D/2030DS Manual Press ENT to enter the next figure. WINBOND: W29C040 2002 / 5 / 27 ACARD 5.11.15 Quick Erase On the above figure press ESC and to enter the following figure. Quick Erase is to erase the data on the DVD rewriteable disks quickly.

  • Page 54: Full Erase

    ARS-2030D/2030DS Manual 5.11.16 Full Erase On the above figure press ESC and to enter the following figure. Full Erase is to erase the data on the DVD rewriteable disks completely. Compared with Quick Erase, Full Erase takes longer time to do the job.

  • Page 55: Adv Setup

    ARS-2030D/2030DS Manual 5.12 Adv Setup Function 12 Adv Setup lets you change the system configuration. This function includes 13 parts. They are UnderRun Protect, Overburn, Read Error Skip, Format HDD, Verify HDD, Burn-in, Update Firmware, Compare Firmware, H/W Diagnostic, Load Default, CD+G, ISRC and Switch Link-Host.

  • Page 56: Overburn

    ARS-2030D/2030DS Manual 5.12.2 Overburn On the above figure press ESC and to enter the following figure. Overburn lets you decide whether to copy beyond the limit of the CD or not. 12-02. Adv Setup Overburn Press ENT to enter the following figure. The default is Off. Press to select On.

  • Page 57: Format Hdd

    ARS-2030D/2030DS Manual 5.12.4 Format HDD On the above figure press ESC and to enter the following figure. Format HDD is to partition the hard disk. But before formatting, all data on the hard disk will be deleted. 12-04. Adv Setup Format HDD Press ENT to enter the next figure.

  • Page 58: Burn-In

    ARS-2030D/2030DS Manual Press ENT to enter the next figure. Use to confirm Disk or Parti. Verify Disk or Partition? Disk Press ENT to verify. After verification LCD will show the results as follows. Verify Hard Disk 5.12.6 Burn-in On the above figure press ESC and to enter the following figure.

  • Page 59: Update Firmware

    ARS-2030D/2030DS Manual Press ENT and use to select the time of simulation such as 1, 2, 3...1000 or Run Continuous. The figure below shows Run Continuous. Sel burn-in num: Run Continuous Press ESC, ENT, to select Erase & Copy as the following figure shows. Erase &...

  • Page 60: Compare Firmware

    ARS-2030D/2030DS Manual You can get the newest firmware version from ACARD by e-mail, or download it directly from the web site: http://www.acard.com Then, unzip the file “cdxxx.bin” and copy it into a blank DVD. After placing the DVD on the DVD-ROM , press ENT. The system will begin searching the new firmware and show the message on LCD as follows after it finds the new firmware.

  • Page 61: Load Default

    ARS-2030D/2030DS Manual Press ENT to enter the next figure. Follow the instructions on LCD to do the button test. After that, the system will do the self-test of SDRAM, the hardware connection test and flash test. All test results will be shown on LCD. It is the easiest way to know if the system can work well.

  • Page 62: Cd+G

    ARS-2030D/2030DS Manual When default loading finishes, LCD will show the results as follows. Load Default 5.12.11 CD+G On the above figure press ESC and to enter the following figure. CD+G is a kind of special copying format. This function supports the special format.

  • Page 63: Switch Link-Host

    ARS-2030D/2030DS Manual Press ENT to enter the next figure. The default is Off. Press to select On. ISRC 5.12.13 Switch Link-Host On the above figure press ESC and to enter the next figure. Switch Link-Host lets you switch to the link-host mode if your 2030DS has connected with a PC.

  • Page 64: Chapter 6 Troubleshooting

    ARS-2030D/2030DS Manual Chapter 6 Troubleshooting 6.1 About LCD After powering on if there is no LCD, please check if the connection of power cord is frim and the environment of power outlet is normal. 6.2 About Error Messages During Copy, Test, Compare and Verify, etc. if you press ESC to abort, an error message will appear on LCD.

  • Page 65: About Buttons

    DVD. The zipped file should be unzipped first. Failure in firmware update may cause the copy smart plus to fail in booting. Under the circumstances, please return the control board to ACARD for repair.

  • Page 66: About Function 12 And Cancellation

    ARS-2030D/2030DS Manual 6.8 About Function 12 and Cancellation If you want to execute function 12 Advanced Setup, you can press ESC for 2 seconds. And during operation if you want to cancel a function like Copy, Test, Verify and so...

  • Page 67: Appendix 1 List Of Functions

    ARS-2030D/2030DS Manual Appendix 1 List of Functions 1 Copy 2 Test 3 Test & Copy 4 Verify 5 Compare 6 Prescan 7 Disc Info 8 Select Source 9 Image (It works only when a hard disk is connected) 9.1 Load 9.2 Delete Image...
  • Page 68 ARS-2030D/2030DS Manual 11.10 Burn On The Fly (Default is On) 11.11 Burn Mode (Default is DAO) 11.12 Button Sound (Default is On) 11.13 Device Info 11.14 System Info 11.15 Quick Erase 11.16 Quick Erase 12 Adv Setup 12.1 UnderRun Protect (Default is On) 12.2 Overburn (Default is Off)

  • Page 69: Appendix 2 Lcd Messages

    ARS-2030D/2030DS Manual Appendix 2 LCD Messages 1. Normal Conditions: Initialize SDRAM..........Initialize the memory of the system. Detect Drives......Detect what drives are connected with the system. User Abort!.............Cancel the job during operation. Analyzing................Analyze the source disc. Source Drive Not Ready........Source drive is not ready to read.
  • Page 70 ARS-2030D/2030DS Manual Press a Key to Eject Good Disc... Press any ket to eject the good disc after copying Press a Key to Eject Fail Disc..Press any key to eject the failed disc after copying. DVD-RW does not Support the Func..DVD-RW doesn’t support this function.
  • Page 71 ARS-2030D/2030DS Manual Verify Hard Disk OK!........The hard disk is verified successfully. Verify Hard Disk Fail!......The hard disk is not verified successfully. Verify Partition Header!..........Verify the partition header. Select HD First!..........Select a formatted hard disk at first.
  • Page 72 ARS-2030D/2030DS Manual Check Sum Error!..........The udpated firmware has errors. Source can’t be Hard Disk!..During comparison the source cannot be hard disk. Last update F/W OK!........The firmware is updated successfully. Last update F/W Fail!......The firmware is not updated successfully.
  • Page 73 ARS-2030D/2030DS Manual Technical Support Form Email: support@acard.com http://www.acard.com Model F/W Version Channel Model F/W Version DVD-ROM DVD Writer Hard Disk Model/type Capacity Firmware version Others Problem Description MAL2030C24DS10-0...

This manual is also suitable for:

Ars-2030ds

Table of Contents