Download  Print this page

Frigidaire MWTRMKT27 Installation Instructions page 2

Built-in trim kit
Hide thumbs
   

Advertisement

Installation Instructions
PARTS INCLUDED IN THE KIT
1. Front Frame Assembly - QTY 1
2. Exhaust Duct Assembly - QTY 1
3. Screw A - QTY 2
4. Screw B - QTY 4
CABINET
OR WALL CUTOUT
Cutout
Dimensions
Height (A)
Minimum
16 3/4" (42.5 cm)
Maximum
17" (43.2 cm)
Width (g)
Minimum
24 3/8" (61.9 cm)
Maximum
24 11/16"(62.7 cm)
Depth (C)
Minimum
20" (50.8 cm)
Front FrameAssembly
Screw A
ScrewB
ExhaustDuctAssembly
ELECTRICAL OUTLET LOCATION
Outlet should NOT be in the shaded area as indicated on
Illustration 1
NOTE 1 :
If the Depth (C) dimension is greater than 21" (53,3 cm),
the outlet location may be in any area on the rear wall.
NOTE 2:
The floor of the opening should be constructed
of ply-
wood strong enough to support
the weight of the oven
and floor load (approximately
100 pounds). The floor
should be level for proper operation of the oven, Be sure
to check the local building code as it may require that the
opening be enclosed with side, ceiling and rear partition,
The proper functioning of the oven does not require the
enclosure,
I
6"
_--
(15.2crn)
Illustration 1
2

Advertisement

Table of Contents
loading

  Related Manuals for Frigidaire MWTRMKT27

This manual is also suitable for:

Mwtrmkt30