Download Print this page
ICP HMICLB17A Installation Instructions
ICP HMICLB17A Installation Instructions

ICP HMICLB17A Installation Instructions

Sbp small bypass humidifier

Advertisement

Quick Links

READ
COMPLETE
SAFETY
|NSTRUCT|ONS
AND
|NSTALLATION
TEMPLATE
BEFORE
STARTING
taller:
This product must be installed by a qualified heating and air conditioning contractor.
Failure to do so, could result in serious injury from electrical shock.
This product must be installed in compliance
with atl local, state and federal codes.
SBP SMALL
BYPASS
HUMiDiFiER
The Small ByPass Humidifier can be installed on either the supply or return plenum of a forced air handling system
Easy reversible installation right hand or left hand.
Read complete instructions
before mounting the humidifier. The unit is 12 %"W x 123/4"H x 91/8"D. The dimensions
and serviceability
must
be considered when selecting the best location for the unit.
If the furnace has central cooling, the humidifier bypass duct must have a damper. The damper should be closed during the cooling season.
Diegrom
A:
FOR OPERATION
DURING
"HEAT
CALL"
ONLY
120VAC
"HUM"
AND "N"
TERMINALS
ON FURNACE
t20 VAC_'l
_VAC
TRANSFORMER
24 VAC
SOLENOID VALVE
LEADS
HUMIDIFIER
Humidifier
Control
©2003 International Comfort Products (USA)
Lewisburg, TN 37091
TEMPLATE
MUST
BE LEVEL
DP10005943
616 01 1005 00

Advertisement

loading

Summary of Contents for ICP HMICLB17A

  • Page 1 READ COMPLETE SAFETY |NSTRUCT|ONS |NSTALLATION TEMPLATE BEFORE STARTING taller: This product must be installed by a qualified heating and air conditioning contractor. Failure to do so, could result in serious injury from electrical shock. This product must be installed in compliance with atl local, state and federal codes.
  • Page 2 READ REVERSE SiDE FIRST J i READ REVERSE SIDE FIRST i READ COMPLETE SAFETY iNSTRUCTiONS iNSTALLATiON TEMPLATE BEFORE STARTING TEMPLATE MUST LEVEL 2 The unit is assembledfor leftside Install a 6" collar in a convenient 1 Placeunit on flatsurfaceand pull Usethis templatefor markingthe Place the unit into the plenum unitopeningto be cutinplenum.Draw...