Windows Nt 4.0 Installation - Lava Computer Octopus-550 Installation Manual

Windows NT 4.0 Installation

1. With the power turned off, insert the Octopus-550 card into any free
PCI slot in your PC. Boot NT logging on as "Administrator" .
2. Place the Octopus-550
and select Run from the Start Menu. When prompted type:
A:\NT4.0\Setup.
3. After the necessary files have been copied, select My Computer and
start Control Panel. A new icon will appear called "LavaPort."This
applet should now be used to configure ALL Com Ports in your PC –
not just Lava serial ports.
Please note that Com 1 may not appear in this applet if you have your
mouse attached to Com 1.
installation diskette into your floppy drive