La Crosse Technology WT 280 Instruction Manual

INSTRUCTION MANUAL WT 280
FEATURES:
- Radio controlled clock
- Manual time setting
- 12-or 24-hour time display
- Calendar display
- Time zone (+/- 12 hours)
- Indoor temperature in °C/°F
- Alarm snooze function
- 5 languages selectable display in Day-of –week: German, English, Spanish, Italian and French
- Jumbo LCD
- Back-light
SETTING UP:
1. Firstly, open the battery cover at the back of the clock.
2. Checking the correct polarization, insert 2 x AA, LR06, 1.5V batteries into the compartment and
replace the cover.
3. When the batteries are inserted, the clock will be automatically scanning for the radio controlled
time signal.
4. If after 6 minutes the DCF time has not been received, you can manually set the time. (see chapter
manual time setting)
5. If the clock cannot receive the signal at the first time, it will automatically attempt to receive the
signal again one hour later.
6. The clock will automatically receive the signal everyday 2.00 am.
7.
MANUAL TIME SETTING:
In some cases after inserting the batteries, the clock may not be able to receive the DCF signal. In this
situation, the time should be set manually.
1. Press and hold the TIME key for 3 seconds and the "hour" digits will start flashing, press ▲ or ▼
key to adjust the hour.
Press the TIME key again and the "minute" digits will start flashing, press the ▲ or ▼ key to adjust
2.
the minute.
3. Press the TIME key again and the "second" digits will start flashing, press the ▲ or ▼ key to clear
the "second" to 0.
4. Press the TIME key again and the "year" digits will start flashing, press ▲ or ▼ key to adjust the
year.
5. Press the TIME key again and the "dash" between "date" and "month" will start flashing, press ▲
or ▼ key to shift the position of "date" and "month".