Alarm Setting - La Crosse Technology RADIO CONTROLLED ALARM CLOCK WITH SOLAR PANEL Operating Manual

: Back-light-On
AL/MIN : Alarm 2 time setting, alarm 2 icon (((2))), alarm STOP for alarm 2
: Set the minutes and snooze duration
: Back-light-On
THE ALARM SOUND
When the alarm 1 is activated, it sounds as follows:
From 0 to 26 seconds
From 27 to 54 seconds
From 55 seconds to 1 minute 35 seconds
Notes: The alarm 1 & 2 will automatically cut off after a time of 1 minute and 35
seconds. The alarm is not switched off but will sound again at the same
time on the following day.

ALARM SETTING:

AL 1
(flashing)
Hours setting
TO SET ALARM 1 & 2:
1. Press the "AL/HR" key until (((1))) icon appears and the AL 1 icon on the LCD
: 2 short and gentle continuous beeps
: 4 short continuous beeps
: very short continuous beeps
Minutes setting
starts flashing. If the waiting time is too long, flashing will stop and the time
can not be set any longer. In such case simply press the "AL/HR" key once
again and the display will resume flashing.
2. While the display is flashing: Set the hours and minutes of the desired alarm
time by use of the "AL/HR" (hours) or the "AL/MIN" keys (minutes)
respectively. (If the respective key is pressed permanently the hours setting
will continuously advance by steps of 1 and the minutes setting by steps of 5).
3. Once the alarm time is set, press the
or wait approximately 8 seconds (automatic exit of alarm time setting mode,
AL 1 will stop flashing).
4. To set alarm 2, repeat above steps
Note: If both alarms are set for the same time then only alarm 2's sound will be
heard. The date cannot be displayed when Alarm 2 setting is activated.
TO CHANGE FROM ALARM 2 TO DATE DISPLAY:
1. Press and hold down the "AL/MIN" key, the AL2 icon will flash (if present) and
the alarm on/off icon "(((2)))" (if present) will disappear.
2. Press the "SNOOZE/24HR AL/
seconds to exit. The date will appear in place of alarm 2 time setting.
3. To return to alarm display, simply press the "AL/MIN " key again.
Note: The date can only be displayed with reception of DCF time and the calendar
will change accordingly to DCF time from Frankfurt.
"SNOOZE/24HR AL/ " key to confirm
but use the "AL/MIN" key.
" key to confirm or wait approximately 8