Picture Adjustment; Other Functions; Picture Format; Auto Sleep - LG Colour Television Owner's Manual

Picture adjustment

You can adjust picture contrast, brightness, colour intensity and sharpness to the
levels you prefer.
1. Repeatedly press the MENU button to select the Picture menu.
2. Press the ¡ª/¡ button to select the desired picture item.
3. Press the ¢‚/¢"button to make appropriate adjustments.
4. Press the OK button to store it for the picture
To recall your preferred setting, press the PSM button until the desired picture
( Dynamic , Mild
are programmed for good picture reproduction at the factory and cannot
Standard
be changed.

Picture format

You can watch the TV in various picture formats; Standard, Wide or Zoom.
Repeatedly press the ARC button to select your desired picture format.
Standard
This picture format is 4 to 3 of general TV.
Wide
You can enjoy the cinema (the picture format of 16:9) or general TV programme
through the 16:9 mode.
The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left
and right so that the screen 16:9 is full.
Zoom
You can enjoy the cinema in a vast screen through the Zoom mode.
The screen 4:3 is magnified to the upper/lower and left/right sides so that the
screen 16:9 is full. The bottom and top of the picture may be lost.
Note :
a. When you switch the set to standby or off, the
reset to the
Standard
b. In the manual AV mode,
TV and AV modes
Inputs can be set for TV or AV mode. AV mode is used when a video cassette
recorder (VCR), or other equipment is connected to the set.
Note : When a VCR is connected via the aerial socket the set is used in TV mode.
See the 'Connection of external equipment' section.
1. Repeatedly press the MENU button to select the Special menu.
2. Press the ¡ª/¡ button to select
3. Press the ¢‚/¢" button to select
The two AV modes are :
AV1 (AV) : VCR connected to the Euro scart socket on the back
AV2 : VCR connected to the AV2 sockets on the front panel (option)
In some models, AV 2 (and Audio/Video in sockets) is an optional function.
Only a set with the AV 2 (and Audio/Video in sockets) can perform this
function.
Alternatively you can select the TV or AV mode by pressing the TV/AV button.

Auto sleep

If you select
Auto sleep On
approximately ten minutes after a TV station stops broadcasting.
1. Repeatedly press the MENU button to select the Special menu.
2. Press the ¡ª/¡ button to select
3. Press the ¢‚/¢" button to select
4. Press the TV/AV button to return to normal TV viewing.
Picture adjustment
, Standard or User
(4:3).
Wide

Other functions

Input
TV
the set will automatically switch itself to standby mode
Auto sleep
On
User
) appears. The picture
Wide
picture format is not available.
.
, AV 1 ( AV ) or AV 2
.
.
.
Dynamic
or picture format is
Zoom
.
, Mild and