Important Safeguards - Hamilton Beach Hand Blenders Use And Care Manual

840083300 Ev03.qxd 2/21/01 2:53 PM Page 2
Parts & Features
1. Speed Control
2. Motor Housing
3. MAX Line (on back)
4. Shaft
5. Blade and Blade Guard
6. High
7. Low
Pièces et caractéristiques
1. Commande de vitesse
2. Boîtier du moteur
3. Ligne MAX (à l'arrière)
4. Arbre moteur
5. Lame et protège-lame
6. Vite
7. Lent
Piezas y características
1. Control de velocidad
2. Cubierta del motor
3. Línea MAX (en el dorso)
4. Eje
5. Cuchilla y protector de
la cuchilla
6. Alto
7. Bajo
2

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should
always be observed, including the following:
1. Read all instructions.
2. To protect against risk of electrical shock, do not put motor end,
cord or plug in water or other liquid.
3. This appliance should not be used by children and care should
be taken when used near children.
4. Avoid contact with moving parts. Keep hands, hair and clothing,
as well as other utensils away from blades and out of container
during operation to prevent the possibility of severe injury to
persons and/or damage to the appliance. A spatula or scraper
may be used when the appliance is not in operation.
5. The use of attachments not recommended or sold by Hamilton
Beach/Proctor-Silex, Inc. for use with this model may cause fire,
electric shock, or injury.
6. When mixing liquids, especially hot liquids, use a tall container
and make several small batches to avoid spillage.
7. Blades are sharp, handle carefully.
8. Do not use over a stove or other heat source.
9. Do not use outdoors.
10. Do not let cord hang over edge of table or counter. Do not let
cord contact hot surface, including the stove.
11. Unplug from outlet when not in use, before putting on or taking
off parts, and before cleaning.
12. Do not operate any appliance with a damaged cord or plug,
or after the appliance malfunctions, or is dropped or damaged
in any manner. Call our toll-free customer service number
for information on examination, repair, or electrical or mechanical
adjustment.
SAVE THESE INSTRUCTIONS
3