Frequently Asked Questions - Toshiba 32W23 DIGITAL Series Owner's Manual

Q
Why is there no sound or picture?
Check that the television is on and that
A
all connections are made properly.
There is a picture, but why is there little
Q
or no colour?
The colour is factory set to Auto to auto-
matically display the best colour system.
A
When using an external source, if there
is little or no colour, improvements may
sometimes be achieved.
To manually change the colour system:
With the external source playing, select
Manual setting in the SETUP menu.
Using or to choose from Auto,
NTSC 4.43, NTSC 3.58, SECAM or
PAL.
Manual setting
Colour system: Auto
EXT 1
Select Change
Why doesn't the video/DVD being
Q
played show on-screen?
Make sure the Media player or DVD
A
player is connected to the television, then
select the correct input by pressing
Why is there a good picture but no
Q
sound?
Check all cable connections and that
A
the volume has not been turned down or
that the sound has not been muted.

Frequently Asked Questions

A
Save Back
OK RETURN
.
Q
What else can cause a poor picture?
Interference or a weak signal. Try a
A
different television station. Manual ne
tuning may help:
Select the ATV Manual Tuning in the
SETUP menu.
Highlight the station and press
press or
tuning.
1 DK
Select
Using or
picture and sound. Press
RETURN.
Q Why doesn't the remote control work?
Check that the batteries aren't exhaust-
A
ed or inserted incorrectly.
Q
Why are there problems with text?
Good performance of text depends on
a strong broadcast signal. If the text is
unreadable or garbled, check the aerial,
satellite or cable connection. Go to the
A
main index page of the text service and
look for the User Guide. This will explain
the basic operation of text in some
detail.
Why are the four coloured text numbers
Q
visible but no text (Analogue Only)?
Text has been selected while viewing
an external source. No text will appear
on-screen or a box may appear stating
A
no information is available. Select a
broadcasting channel and press
access.
61
, then
to select Manual ne
ATV Manual Tuning
Position
A C 69 0 − − − − −
Change Save
OK RETURN
to adjust to get the best
and then
Back
to