Hanging The Unit; Battery Low Indicator - Brookstone WeatherCast Instruction Manual

Hanging THE uniT

Insert a nail or screw into your desired spot on the wall and place the
HAnGInG HoLe over it. or, use the built-in magnet by placing the unit
against a metal surface.
"no covERagE" mEssagE
will appear when your device has been unable to receive signal
for an extended period. Check our map at http://map.myambient.com to
ensure that your location receives coverage from our network.

baTTERy loW indicaToR

flashes when the device's batteries are low and need to be replaced.
13