How To Assemble And Use - Hamilton Beach 840115900 Use & Care Manual

840115900 ENv00.qxd 6/6/03 9:03 AM Page 6

How to Assemble and Use

IMPORTANT: Your Hamilton Beach air purifier is designed for easy use and
maintenance. Make sure that the UV bulb, HEPA filter, and carbon pre-filter are
properly installed before use.
Before First Use
Be sure to remove all packing materials.
The filters and UV bulb are packed in
plastic bags inside the air purifier for
shipping.
Selecting the Proper Location
To prevent the risk of personal injury or damage to the air purifier and provide
the best possible performance of your air purifier, follow the placement
guidelines below:
DO:
• Place the air purifier on a flat, stable
• Place the air purifier near an electrical
outlet where it is out of the way.
Make sure that the air purifier and
the cord do not present tripping
hazards.
• Select a central location with
adequate air circulation.
• Turn off and unplug the air purifier
before moving or servicing it, or if it
will not be used for several days.
• Route the electrical cord clear of
furniture to prevent damage from
pinching.
6
Refer to pages 7 to 9 for unpacking
and installation instructions.
DO NOT:
• Do not stand, sit, or place any
surface.
• Do not block the air intake and
outlet grilles with drapes, curtains,
or blinds. This may cause reduced
performance.
• Do not use in a kitchen, garage, or
area with grease, oil or chemicals
such as solvents or insecticides.
• Do not place on or near heat
sources such as stoves, radiators,
or heaters, or in direct sunlight.
• To reduce electrical noise and
interference, do not place on or near,
or plug into the same outlet as TVs,
baby monitors, or cordless phones.
objects
on the air
purifier. It is
not designed
to support
additional
weight.