American DJ Mega Pixel Arch User Instructions page 6

Mega Pixel Arch
2. Either "ON" or "OFF" will now be displayed. Press the UP or
DOWN buttons to select one or the other.
3. Press ENTER to confirm, or press the MENU button
.
the main menu
dISP
- This will "flip" the LED display
1. Tap the MENU button until "dISP" is displayed, press ENTER.
2. Either "dISP" (display normal) or "dSIP" (display inversion) will
now be displayed. Press the UP or DOWN buttons to select one
or the other.
3. Press ENTER to confirm, or press the MENU button
.
the main menu
FHrS
- With this function you can display the running time
of the fixture.
1. Tap the MENU button until "FHrS" is displayed, press ENTER.
2. The display shows the running time of the unit. Press MENU
to exit.
VEr
- This will display the software version
1. Tap the MENU button until "VEr" is displayed. Press the ENTER
button and the software vesion will be displayed.
2. Press the MENU button to leave this function.
American DJ Supply - www.americandj.com - Mega Pixel Arch Instruction Manual Page 11
© ®
System Menu Mega Pixel Arch
DMX MENU:
NotE: Whenever a DMX signal is received, i.e., a XLR cable is
connected, the fixture will automatically go to the DMX Address
Setting.
to return to
Operating through a DMX controller give the user the freedom to cre-
ate their own programs tailored to their own individual needs. This
function also allows you to use your fixtures as spot lights.
1. This function will allow you to control each individual fixture's
traits with a standard DMX 512 controller such as the
Elation
2. To run your fixture in DMX mode, plug in the fixture via the XLR
connections to any standard DMX controller. Set your desired
DMX address following the directions on page 8, and the set-up
specifications that come with your DMX controller.
to return to
NotE: Regarding 7, 10, 16, and 28 DMX Channel Modes: The
macro/program channel will overide all RGB channels. When the
macro/program channel is being used the macro speed channel will
control the speed. You can also set the macro/program to sound
active by setting the values of the macro speed channel between
243-255. To use the color fade, the macro/program channel must be
completely off. Please see the diagram on page 13 very help.
24 DMX Channel Mode does not a have macro/program, strobe,
or a master dimmer channel.
Mega Pixel Arch
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. the quantity that can be
connected is 19 fixtures maximum. After 19 fixtures you will need
to use a new power outlet. They must be the same fixtures. DO
NOT mix fixtures.
American DJ Supply
©
Show Designer™ or the Elation
®
Powr Cord Daisy Chaining
- www.americandj.com - Mega Pixel Arch Instruction Manual Page 12
®
Operating Instructions
DMX Operator.™
®