Internet And Wireless Settings; Installing Your Router Using The Smart Wizard; Logging Into Your Router - NETGEAR WGR614v8 Reference Manual

This chapter describes how to use the Smart Wizard Installation Assistant on the Resource CD to
configure your wireless router's Internet connection and wireless parameters.
Once you are connected to the Internet and your wireless connections are working, you can also
configure the router's content filtering parameters if you need to change the default settings. See
Chapter 3, "Content Filtering.
If you are an advanced user, you can also configure maintenance (see
and advanced (see Chapter 5, "Advanced Router
factory defaults.
Note: Do not change your existing Internet connection. Instead, let the Smart Wizard
Installation Assistant on the Resource CD guide you through the setup process.

Installing Your Router Using the Smart Wizard

1. Insert the Resource CD into the CD drive on your PC.
2. Click Setup and follow the instructions. The Smart Wizard Installation Assistant will guide
you through the setup process:
• How to change your cabling.
• How to connect to the Internet.
• How to configure your wireless settings.
If you want to change your Internet or wireless settings later, see
Configuration" on page

Logging Into Your Router

To log into your router after you have configured your router, do the following:

Internet and Wireless Settings

Configuration) settings if you need to change the
2-5.
v1.0, July 2007
Chapter 2
Chapter 4, "Maintenance)
"Changing Your
2-1