JVC UX-L5V Instructions Manual page 8

~
AM/FM antenna
To assemble the AM loop antenna
To connect AM/FM antenna
FM antenna (supplied)
Extend it so that you can obtain the best
reception.
Black
White
Turn it until the best reception is obtained.
• Keep the AM loop antenna cable wrapped around the
AM loop antenna frame, otherwise the effectiveness and
sensitivity of the AM loop antenna may be reduced.
For better FM reception
Disconnect the supplied FM antenna, and connect to an
outdoor FM antenna using a 75 Ω wire with coaxial type
connector (IEC or DIN45325).
5
AM loop antenna (supplied)
FM outdoor antenna
(not supplied)
Ÿ
Speakers
• When connecting the speaker cords, match the polarity
of the speaker terminals: red to (+) and black to (–).
Press and hold
Insert
R
From right
speaker
CAUTION: SPEAKER
IMPEDANCE 6
• DO NOT connect more than one speaker to
each terminal.
• DO NOT push or pull the speakers as this
will damage the foot spacers at the bottom of
the speakers.
!
Digital audio component
L
I C A
O P T O P T
I T A L
D I G D I G
O U T
Protective cap
• Set "AUDIO OUT" in the "
to the connected digital audio equipment (see page 34).
• The digital signal through the OPTICAL DIGITAL OUT
terminal is transmitted only when "DVD/CD" is selected
as the source.
Release
Red
L
From left
Black
speaker
16
L
I C A
I T A L Optical digital
O U T
cord (not
supplied)
" menu correctly according