Technical Specifications - Communications - HP dc7700 Overview

QuickSpecs

Technical Specifications - Communications

Integrated Intel 82566DM
Gigabit Network
Connection
Connector
Controller
Memory
Data rates supported
Compliance
Bus architecture
Data transfer mode
Hardware certifications
Power requirement
ACBS
Boot ROM support
Network transfer mode
Network transfer rate
Environmental
Management capabilities WOL, auto MDI crossover, PXE, Muti-port teaming, RSS, Advanced cable
Alerting
DA - 12543 Canada — Version 34 — October 29, 2008
RJ-45
Intel Nineveh Gigabit platform LAN Connect Networking Controller
Integrated 96KbB on chip buffer memory
10/100/1000 Mbps
IEEE 802.1P, 802.1Q, 802.2, 802.3, 802.3 ab and 802.3u compliant,
GLCI, LCI interface. Intel specific MAC to PHY interface
At gigabit GLCI (802.3 serdes) is for Data, LCI (parallel bus)for MDIO, at 10/100
LCI for both data and MDIO, GLCI is idle.
FCC, B, CE, TUV- cTUVus Mark Canada and United States, TUV- GS Mark for
European Union
Require 3.3Vaux,1.8V and 1.0V or just 3.3V with integrated regulators
Power consumption 1.16 Watts for 82566, whole LOM 2.53 Watts
Intel Auto Connect Battery Saving feature
Yes
Full-duplex
Half-duplex (not available for the 1000BASE-T transceiver)
10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
1000BASE-T (full-duplex) 2000 Mbps
Operating temperature
Operating humidity
diagnostic.
ASF 2.0 support, AMT 2.0 support on dc7700p models with Intel vPro
Technology
HP Compaq dc7700 Business PC
32° to 131°F (0° to 55° C)
To 70° C for external regulator
85% at 131° F (55° C)
Page 25