Page 1
DIA.NIOND Product Owners Manual COMPONENTS Serial Number Date Of Purchase - - - - - - - - - - - - - -...
Page 3
Mid-Bass Mounting Tweeter The illustration above shows the parts included and correct mounting assembly of the HEX component mid-bass drivers. Grill is optional. Be sure to check the available mounting depth before installation begins. Use of the foam gasket is recommended to ensure a proper seal between the speaker and mounting surface.
THIELE/SMALL PARAMETERS Each HEX component crossover has a third set of outputs marked "RAF". This stands for Rear Parameter (unit) H500 H600 S.Ota S.Ots Acoustic Fill. This output can be used to power an additional speaker off the same channel without affecting the impedance load on the source unit.