Related Manuals for Diamond HEX Series
Summary of Contents for Diamond HEX Series
- Page 1 Product Owners Manual COMPONENTS Serial Number____________________________________________________ Date Of Purchase__________________________________________________...
-
Page 2: Special Thanks
Your new HEX series system is comprised of loudspeakers and crossovers that have been precision engineered to produce the highest sound quality possible. For more than a decade, Diamond Audio has been dedicated to excellence in sound reproduction technology. Our products represent the latest advances in loudspeaker technology. Only the very best materials find their way into Diamond products. - Page 3 FEATURES Proprietary Composite HEX Cone Technology Butyl Rubber Surrounds Die-Cast Aluminum Frames Flat Progressive Spider Integrated Lead Wires Ferro Fluid Cooled Neodymium Tweeters Model Specific, Competition Grade Crossovers w/ RAF Output Parts List - S400, S500, & S600 (2) Hex Mid-Bass Speakers (2) Hex Grills w/ Mounting Ring (2) Mounting Gaskets (2) Hex Crossovers...
-
Page 4: Tweeter Mounting
MOUNTING Screw Clips Gasket Mid-bass Driver Grill Mounting Ring Mounting Screws Mid-Bass Mounting The illustration above shows the parts included and correct mounting assembly of the HEX component mid-bass drivers. Grill is optional. Be sure to check the available mounting depth before installation begins. - Page 5 CROSSOVERS Tweeter Each HEX component system comes with a pair of model specific adjustable crossovers. Under the cover there are a pair of jumpers that control tweeter and RAF levels. These jumpers are designated “TWEETER” and “REAR”. The tweeter adjustment has settings for -2dB of attenuation, +2dB of gain or 0dB which is flat.
- Page 6 3-WAY SYSTEM CONNECTION HEX speaker systems offer the ability to run a true 3-way component system by just using a special add-on kit, model number S6.0mx3. This add-on kit is compatible with all HEX component systems and is fully programmable for high pass frequency and attenuation. The add-on crossover also is bi-amp ready (be sure to flip the bi-amp switches).
-
Page 7: Thiele/Small Parameters
THIELE/SMALL PARAMETERS S.0ta S.0ts S400 S500 S600/6.0mx3 Parameter (unit) Sensitivity - 2.83V@1m (dB) 0.35 0.37 0.49 0.54 0.65 1650 1520 Fs (Hz) 25.3 Vas (L) Re (ohm) Xmax (mm/N) Impedance (ohm) RMS Power (watts) PHYSICAL DIMENSIONS S6.0mx3 S.0ta/s S400 S500 S600 Model (inches) Total Diameter (A) -
Page 8: Warranty
Warranty Diamond Audio warrants this product to be free from defects in material and workmanship under normal use for a period of one (1) year from date of original purchase. Should service be necessary under this warranty for any reason due to manufacturing defect or malfunction during the warranty period, Diamond Audio will replace or repair (at our discretion) the defective merchandise at no charge.