Table of Contents
Advertisement
Quick Links
Hanter® Wireless Intelligent Alarm Systems - Model HM2078
7. General Reminders
7.1 If the alarm system is temporarily not in used, keep it in a proper area to avoid
the following conditions:
a. Direct exposure to sunlight
b. Very high or low temperature areas
c. Away from very humid and dusty areas
d. Disconnect the batteries of the Control Panel and other accessories.
7.2 When in use, the Control Panel, switches, sensors and detectors must be placed
or installed under stable conditions.
7.3 The Control Panel, switches, sensors and detectors are not advisable to be
placed or installed at the area with heavy magnetic interference.
7.4 To maximize the signal transmission, accuracy, and extend the life span of the
batteries, all antennas should be extended to the maximum.
7.5 Do not try to repair the alarm system. It will affect the validity of your warranty.
Consult your local authorized dealer.
Manufactured & Distributed by:
Hanter Marketing Sdn Bhd (717180-X)
12-3, Subang Business Centre, Jalan USJ 9/ 5T
47620 Subang Jaya, Selangor, Malaysia
Tel: 03 8023 4122
Fax: 03 8023 3028
Email: info@hanter.com.my
www.hanter.com.my
User Manual
Wireless Intelligent Alarm System
HM2078
Advertisement
Table of Contents
Related Manuals for Hanter HM2078
Summary of Contents for Hanter HM2078
- Page 1 Hanter® Wireless Intelligent Alarm Systems - Model HM2078 7. General Reminders 7.1 If the alarm system is temporarily not in used, keep it in a proper area to avoid the following conditions: a. Direct exposure to sunlight b. Very high or low temperature areas c.
-
Page 2: Troubleshooting
Hanter® Wireless Intelligent Alarm Systems - Model HM2078 Hanter® Wireless Intelligent Alarm Systems - Model HM2078 Item Issues Possible Cause Solution Contents Unable to activate Long Key in wrong Password Key in password again. Distance Remote Control the Control Password keyed in too fast Key in password slowly. -
Page 3: System Overview
The newly developed alarm series, Homes/Commercial Digital Wireless Intelligent The preset auto-dial number is not Program the preset auto-dial Alarm System Model HM2078 has a Micro-Processor Chip and Wireless RF Control programmed numbers Technology to ensure the reliabilities, easy installation and operation of the system. -
Page 4: System Workflow
Hanter® Wireless Intelligent Alarm Systems - Model HM2078 Hanter® Wireless Intelligent Alarm Systems - Model HM2078 6. Trouble Shooting 2. System Workflow Item Issues Possible Cause Solution Long Distance Remote Controlling Door / window Telephone line is in working Telephone line to Control Panel... -
Page 5: Back-Up Batteries
Hanter® Wireless Intelligent Alarm Systems - Model HM2078 Hanter® Wireless Intelligent Alarm Systems - Model HM2078 4. Unit Descriptions 5.3.6 Notification (when away from premise) When the alarm is triggered, the user (pre-set number) will receive a call with the 4.1 Standard Accessories:... -
Page 6: Optional Accessories
Hanter® Wireless Intelligent Alarm Systems - Model HM2078 Hanter® Wireless Intelligent Alarm Systems - Model HM2078 5.2.3 Voice Message Recording Functions are as following: Step 1: Press “ ” key of the Keychain Remote Control Step 2: Press and Hold the Program Key... -
Page 7: System Installation
Hanter® Wireless Intelligent Alarm Systems - Model HM2078 Hanter® Wireless Intelligent Alarm Systems - Model HM2078 Step 4: Lift up the handset of Telephone unit 4.2.4 Wireless Glass Break Detector Step 5: Press 0128881234*1# on the keypad of telephone unit... - Page 8 Hanter® Wireless Intelligent Alarm Systems - Model HM2078 Hanter® Wireless Intelligent Alarm Systems - Model HM2078 ------HM2078 Step 4: Attach the magnet bar using the screws or adhesive tape to the moving b. The detector should not be located near any areas that emit gas (cooking area).
Need help?
Do you have a question about the HM2078 and is the answer not in the manual?
Questions and answers