TDK TVT1001BLK User Manual

Belt-drive turntable; professional turntable with auto speed correction
Hide thumbs Also See for TVT1001BLK:

Advertisement

Belt-Drive Turntable
PROFESSIONAL TURNTABLE WITH AUTO SPEED CORRECTION
USER GUIDE
|
TVT1001BLK
TVT2002BLK
Imation Confidential - Use Only By Permission
Controlled material extracted from Matrix on Aug 24, 2010 08:31:11 AM CDT

Advertisement

Table of Contents
loading

Summary of Contents for TDK TVT1001BLK

  • Page 1 Belt-Drive Turntable PROFESSIONAL TURNTABLE WITH AUTO SPEED CORRECTION USER GUIDE TVT1001BLK TVT2002BLK Imation Confidential - Use Only By Permission Controlled material extracted from Matrix on Aug 24, 2010 08:31:11 AM CDT...
  • Page 2: Safety Precautions

    SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
  • Page 3: Important Safety Instructions

    SAFETY PRECAUTIONS IMPORTANT SAFETY INSTRUCTIONS Read these Instructions. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Keep these Instructions. part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 4: What's Included

    WHAT’S INCLUDED WHAT’S INCLUDED (CONTINUED) Belt Cover Dust Cover CD ROM Part No. 447-E13000-00R* Part No. 301-E13000-00R* (TVT2002 only) Part No. 393-E13000-000R* AC Adapter Main Unit Part No. 001-41E130-01R* B Type USB Cable Audio Cable 45 Adapter Counter Weight Platter with Belt Platter Cover (TVT2002 only) Part No.
  • Page 5: Location Of Controls

    LOCATION OF CONTROLS SETUP Motor/Motor Cover After unpacking, set up the unit as follows: 3b. Gently pull the Drive Belt around the Motor Drive Belt Pulley. Be careful to not allow finger grease or Spindle Gently place the Platter onto the Spindle, other contamination to foul the belt.
  • Page 6 SETUP (CONTINUED) SETUP (CONTINUED) Installation of the Counterweight 5e. The next step is to create a reference to this TO USE WITH A COMPUTER (TVT2002 only): As with all quality turntables built to utilize position by rotating the numerically enhanced Install recording software as shown on page 22.
  • Page 7 SETUP (CONTINUED) SETUP (CONTINUED) TO USE WITH A UNIT WITH LINE IN JACK (HOME STEREO, BOOM BOX, ETC.): On the contrary, if you have this switch in the “OFF” position and attempt to connect the turntable’s RCA connectors to the line input levels of a receiver or amplifier such as “Tape” or “VCR”, you will find that the NOTES: level is insufficient and will not allow you to hear the output sufficiently.
  • Page 8: Operation

    SETUP (CONTINUED) OPERATION C. TO USE WITH A UNIT WITH PHONO PREAMPLIFIER INPUTS (RECEIVER, PRE-AMP, ETC.): Put a record on the turntable and remember to use the 45 adapter if using a 45 single record. (See page 10 for the Warning regarding the PRE-AMP switch.) NOTE: Some 45 single records may not need the 45 adapter.
  • Page 9 OPERATION (CONTINUED) OPERATION (CONTINUED) If necessary, adjust the Anti-Skating control as previously discussed 10. To turn the unit off, rotate the 33/OFF/45 control to the OFF position; in the initial setup. In most cases, the Anti-Skating control should the Power indicator and display will turn off. Replace plastic Stylus be set to the same number as the counterweight. Anti-Skating cover to protect stylus.
  • Page 10 The Audacity software, along with complete NOTE: When using USB audio devices such as the documentation, can be downloaded for the Mac at TDK Life on Record turntable, it is expected that the http://audacity.sourceforge.net. drivers installed when the unit is connected to your computing device will be used to route your audio.
  • Page 11 INSTALLING TDK LIFE ON RECORD VINYL RECORDER – WINDOWS INSTALLING TDK LIFE ON RECORD VINYL RECORDER – WINDOWS (CONT.) INSTALLING THE VINYL RECORDER SOFTWARE 3. The Welcome to the Vinyl Recorder Setup Wizard 5. The Select Destination Folder screen will appear.
  • Page 12 INSTALLING TDK LIFE ON RECORD VINYL RECORDER – WINDOWS (CONT.) USING TDK LIFE ON RECORD VINYL RECORDER – WINDOWS 9. The Ready to Install screen will appear. 11. The Complete Registration screen will appear After completing the installation process, the With the turntable connected to your computer, Click Install to proceed with the installation.
  • Page 13 USING TDK LIFE ON RECORD VINYL RECORDER – WINDOWS (CONT.) USING TDK LIFE ON RECORD VINYL RECORDER – WINDOWS (CONT.) First click on the Options button. This will bring up The Recorder Module The Recorder Transport buttons are shown below.
  • Page 14 USING TDK LIFE ON RECORD VINYL RECORDER – WINDOWS (CONT.) USING TDK LIFE ON RECORD VINYL RECORDER – WINDOWS (CONT.) 4. When the first side of the record has ended, click 6. Click the Rewind button to go back To Save an Audio File: 3.
  • Page 15 USING TDK LIFE ON RECORD VINYL RECORDER – WINDOWS (CONT.) USING TDK LIFE ON RECORD VINYL RECORDER – WINDOWS (CONT.) When the Encoder Options window appears, select The Tagger Module The Burner Module To Burn an Audio File to CD: the desired settings and click OK.
  • Page 16: Troubleshooting Guide

    Record is playing too fast or too slow. • restarting the computer The 33/OFF/45 control is set incorrectly; make sure it is For detailed troubleshooting of the TDK Life on Record Vinyl Recorder software, please refer to its manual. Record/Tone Arm moves slightly or skips. set to the corresponding speed. You can download the complete user’s manual at http://www.cakewalk.com.
  • Page 17: Specifications

    SPECIFICATIONS Dimensions .....................4.5 (H) x 15 (W) x 17.9 (L) inches Weight ............................. 14.3 lbs Power Supply ..................DC 12V Adapter (Center Positive) Power Consumption ........................5 Watts Supported Systems ................Windows 7/Vista/XP, Mac 10.4+ Type ..........................Belt Drive Turntable Motor ........................DC, Servo Controlled Wow &...
  • Page 18: Contact Information

    AND ACCESSORIES FULFILLMENT CENTER AT: 1-800-379-8439. Imation Enterprises Corp. 1 Imation Way, Oakdale, MN 55128-3414 USA The TDK Life on Record logo is a trademark of TDK Corporation and is used under license from TDK Corporation. Imation Confidential - Use Only By Permission...
  • Page 19 Imation Enterprises Corp. 1 Imation Way, Oakdale, MN 55128-3414 USA The TDK Life on Record logo is a trademark of TDK Corporation used under license. TVT1001BLK TVT2002BLK Imation Confidential - Use Only By Permission 63952289-B Controlled material extracted from Matrix on Aug 24, 2010 08:31:11 AM CDT...

This manual is also suitable for:

Tvt2002blk

Table of Contents