Additional Information; Troubleshooting Guide; Specifications - Power Acoustik HP-560SB Instruction Manual

2.1ch audio sound bar
Table of Contents

Advertisement

Available languages

Available languages

05

Additional information

Troubleshooting guide

If the unit encounters any problem, please check the following first before seeking service.
No power/No display.
Check that the power cord is connected securely.
No sound.
Make sure the audio source is turned on, and a music track is selected and playing.
Volume might be set at its minimum. Increase the volume level.
Sound is too low.
Increase volume setting of the audio source.
Volume might be set at its minimum. Increase the volume level.
System does not respond to remote control.
The batteries in the remote are weak: Put in new ones.
The distance between the remote and the player is too great: use the remote within its operating
range.
The remote is not pointed at the remote sensor of the player.
There are obstacles between the remote and the player.
Unplug the power cable for 1 minute, and then plug it back in. This will reset the system.

Specifications

AC power supply
Dimensions
Net weight
Woofer
Mid-range
Total Power
Frequency response
S/N
Input Sensitivity
Technical support is available Monday
through Friday from 7am to 4pm at
(323)724-4600 extension 293. If Tech Support is
busy, please leave a message and you will get
a return call within 24 hours. For faster
service, please email
tech-support@poweracoustik.com
:
AC 100-240V 50/60HZ
:
32 1/4" (W) x 3 7/8" (H) x 4 3/4" (D)
:
11 lbs
:
4", 75 W
:
2.75", 50
W
x
2
:
175 W
:
50 Hz ~ 20 kHz
:
>90dB
:
Woofer: 480mV
:
Mid-range: 520mV
8

Advertisement

Chapters

Table of Contents
loading

Table of Contents