SAFETY HINTS - Read these instructions - Keep these instructions - Heed all warnings - Follow these instructions Caution: To reduce the risk of electrical shock, do not remove the cover. Or expose this appliance to rain or moisture. No user serviceable parts inside;...
Page 5
If you follow the advice given in this manual, you will soon be in a position to take full advantage of the quality of your new Framus amplifier. Please retain this manual as you may need to consult it again. Please send your PASSPORT to the address given in it.
FRONT CONTROL PANEL INPUT Socket for the connection of a guitar Clean Channel: VOLUME Rotary control to set input sensitivity and volume level. *TIP* BASS Rotary control to set the level of low frequencies in the preamp TREBLE Rotary control to set the level of high frequencies in the preamp CLEAN BRIGHT Switch to boost high frequencies LEAD BUTTON...
REAR CONTROL PANEL MAINS IN AC terminal with integrated fuse compartment for connection to the mains power supply FOOTSWITCHES Sockets for the footswitches that are used to switch between the two channels, Lead Boost on/off, and reverb, and to switch between the two output volumes (MASTER 1 and MASTER 2).
TECHNICAL DATA Nominal output power level 50 watts Maximum output power level 90 watts Output impedance levels or 8 switchable CLEAN CHANNEL Input sensitivity -40 dB (8 mV) Overdrive threshold -2 dB (600 mV) CRUNCH CHANNEL Input sensitivity -62 dB (0,5 mV) Overdrive threshold -2 dB (600 mV) LEAD CHANNEL...
Need help?
Do you have a question about the Framus and is the answer not in the manual?
Questions and answers