Download Print this page

Philips SatinPerfect HP6576 User Manual page 10

Philips satinperfect epilator
Hide thumbs Also See for SatinPerfect HP6576:

Advertisement

EnglisH
10
-
When you use the active hairlifter with active massage, make sure the active massaging roller
and the active hairlifter always stay in contact with the skin. The massaging roller stimulates and
relaxes the skin for a gentler epilation.
shaving the underarms and bikini line
Use the sensitive area shaving head to shave sensitive areas such as the underarms and the bikini
line.
1
Press the release button (1) and remove the epilating head from the epilator (2) (Fig. 13).
Note: The sensitive area shaving head can be removed in the same way.
2
Put the sensitive area shaving head on the appliance and press it until it snaps home
('click'). (Fig. 14)
3
Switch on the appliance.
Note: Use speed II when you shave with the sensitive area shaving head.
4
Stretch the skin with your free hand. When shaving the underarms, raise your arm to stretch
the skin.
5
Place the sensitive area shaving head at an angle of 90° onto your skin with the on/off button
pointing in the direction in which you are going to move the appliance.
6
Move the appliance slowly against the direction of hair growth.
Note: Make sure that the shaving unit with integrated trimmer is always fully in contact with the skin.
-
Shave your bikini line as shown in the figure (Fig. 15).
-
Shave your underarms as shown in the figure. Move the appliance in different
directions. (Fig. 16)
7
When you have finished shaving, switch off the appliance and clean the sensitive area shaving
head (see chapter 'Cleaning and maintenance').
8
Put the trimming comb on the sensitive area shaving head when you store the appliance.
trimming with the trimming comb
Use the sensitive area shaving head with the trimming comb attached to trim your bikini line to a
length of 3mm.
You can also use the trimming comb to pretrim long hairs (longer than 10mm) on the underarms
or bikini line.
1
Press the release button (1) and remove the epilating head from the epilator (2) (Fig. 13).
2
Put the sensitive area shaving head on the appliance and press it until it snaps home
('click') (Fig. 14).
3
Put the trimming comb on the sensitive area shaving head (Fig. 17).
4
Follow steps 3 to 6 in section 'Shaving the underarms and bikini line'.
Note: Make sure the surface of the trimming comb always stays fully in contact with the skin to ensure
an even trimming result.
5
When you have finished trimming, switch off the appliance and clean the sensitive area
shaving head and the trimming comb (see chapter 'Cleaning and maintenance').
6
Leave the trimming comb on the sensitive area shaving head when you store the appliance.
Corded use
To run the epilator from the mains, switch off the appliance and connect it to the mains.
4203.000.4681.1.indd 10
01-12-09 10:14

Advertisement

loading