Feature Buttons - Toshiba Strata CS User Manual

The Grand Tour
Buttons
Secondary Extension Numbers
of Station 101
Calls to Station 101 can be answered
by Station 100 by pressing the 101-1
or 101-2 button.
Station 100's Extension Numbers
Figure 3 Multiple Extension Numbers Example

Feature Buttons

For you to be able to make any assignments or changes to the feature buttons you must
have the proper permissions assigned to your extension by the System Administrator.
Preprogrammed feature buttons can be assigned to a station and can vary by
individual station. The following table describes the feature buttons for use with Strata
CS. These buttons provide Call handling functions that would usually be done either
via the Client application or the TUI.
Each DKT can be programmed by the administrator or user to support Primary
Extensions and Secondary Extensions in addition to a series of options. Primary
Extensions and options can be added to DKTs by the individual user using the Client
Interface if the proper permissions are set. Secondary Extensions, regardless of the
user permissions, can only be assigned by the Administrator.
Each DKT supports as many Primary Extensions as there are Flexible buttons
available. This varies based on the specific DKT model in use. Using the example
6
101 (2)
101 (1)
100 (4)
100 (3)
100 (2)
100 (1)
Station 100
Strata CS Digital Telephone 02/06
100 (4)
100 (3)
100 (2)
100 (1)
101 (2)
101 (1)
Station 101