Page 1
HDMI-SPL-2108C 2x8 HDMI 1.3 over Single CAT5 Distribution Amplifier User Manual Made in Taiwan...
Page 2
However, like all electronic equipments, the HDMI-SPL-2108C should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
Page 3
Introduction The HDMI-SPL-2108C 2x8 HDMI 1.3 over Single CAT5 Distribution Amplifier provides the most flexible solution by which the high definition video and high quality audio can be transmitted to different locations over a long distance. The devices are cascadable, allowing you to extend HDMI compliant displays almost anywhere.
Page 4
1 Watt [max] 0.5 Watt [max] Operation temperature 0~40°C [32~104°F] Storage temperature -20~60°C [-4~140°F] Relative humidity 20~90% RH [no condensation] 1x HDMI-SPL-2108C 1x HDMI-EXT-0101C-RX 2x Rack-mounting ears 1x HDMI-EXT-1111C-RX Package Contents 1x 5V power adapter 1x 5V power adapter 1x User Manual...
Panel Descriptions HDMI-SPL-2108C 1. +5V DC: Power jack for 5V DC 2. HDMI INPUT 1: Connect to one HDMI source here 3. HDMI INPUT 2: Connect to another HDMI source here 4. EDID & Audio: DIP Switch (see more detail in the next section) 5.
DIP Switch DIP Switch Position Pin-1 Pin-2 Video Audio Description Pin-3 Pin-4 Default Mode – Up to 1080p & stereo audio output for OFF [ ] OFF [ ] Up to 1080p Stereo most HDTVs Up to Safe Mode – Enforce the system output at 720p/1080i OFF [ ] ON [ ] Stereo...
Page 8
IR Control Function Key Function Description POWER Turn on/off HDMI over CAT5e/6/7 transmission on all eight output ports Switch to the other channel from either HDMI INPUT 1 or HDMI INPUT 2 that is in play Switch to the other channel from either HDMI INPUT 1 or HDMI INPUT 2 that is in play SOURCE SELECT 1 Select HDMI INPUT 1 to be the input source SOURCE SELECT 2 Select HDMI INPUT 2 to be the input source Mute on/off (audio off, video on) on all eight output ports...
Page 10
Notice 1. If the DVI or HDMI device requires the EDID information, please use EDID Reader/Writer to retrieve and provide DVI/HDMI EDID information. 2. All HDMI over CAT5 transmission distances are measured using Belden CAT5e 125MHz LAN cable and ASTRODESIGN Video Signal Generator VG-859C. 3.
Need help?
Do you have a question about the HDMI-SPL-2108C and is the answer not in the manual?
Questions and answers