Model 1394A and 1398A HDMI Distribution Amplifiers HDMI IN HDMI OUT EDID AUTO 5V DC 膜面向上 ���� ������ ����� ����� �� 1394A ���� CLUX-14S(TVONE) 2008.03.03 ������� ����� MRN-1TDA654-2 1394A Front and Back Artwork 陳秋文 MMC-1TDA654-U ���� ������� ��� ����� ��� ���� 3/13/08...
Audio Authority. These distribution amplifiers are designed to split an HDMI signal from one source to multiple HDMI displays without signal degradation or loss of encryption. The 1394A and 1398A are HDCP 1.1 compliant, and HDMI v1.3 compliant, supporting deep color video and Dolby TrueHD and DTS-HD Master Audio.
3.0 GETTING THE BEST RESULTS Many factors influence the quality and reliability of HDMI signal distribution installations. The following are the main factors to consider, and basic precautions that will ensure the best possible performance. • Resolution tracking. Set up the source to output the best resolution that all TVs are capable of displaying.
Page 5
Higher Lower Shorter Distance Longer Distance • HDMI cable lengths of up to 100 ft. between amplifiers may be possible, when premium cables are utilized. Use of high resolutions, refresh rate, or deep color may limit maximum cable run length. •...
5V DC HDMI IN HDMI OUT EDID AUTO 5V DC The 1394A has a single HDMI input and four HDMI outputs. The 1398A has eight outputs. The Power LED indicates that the unit is receiving 膜面向上 ���� ������ ����� ����� ��...
Note: Proper operation of HDMI distribution amplifiers depends on the use of high quality HDMI cables with low loss, high bandwidth signal handling capabilities. The distance specification cannot be guaranteed unless cables used throughout the system meet these high standards. 6.0 TROUBLESHOOTING •...
8.0 LIMITED WARRANTY Should any consumer product from Audio Authority fail due to defects in materials or workmanship within one year from the date of the original sale to the end-user, Audio Authority guarantees that we will replace the defective product at no cost. Freight charges for the replacement unit will be paid by Audio Authority (Ground service only).
9.0 REGULATORY COMPLIANCE The 1394A, and 1398A distribution amplifiers have been tested for compliance with appropriate FCC and CE rules and regulations and are also RoHS compliant. The power adaptor/supplies have been tested for compliance with UL, CE and CSA rules and regulations and are also RoHS compliant.
Need help?
Do you have a question about the 1394A and is the answer not in the manual?
Questions and answers