Table of Contents
Advertisement
4-5. Setup – DISPLAY Mode
In the SETUP menu, select the DISPLAY tab. Then, the DISPLAY menu is displayed as pictured below.
Navigate through the menu items or change the settings using the mouse or the remote control. To return to
the previous setup menu screen, press the ESC button.
Item
OSD
OSD CONTRAST
MAIN MONITOR
SEQUENCE
SEQUENCE
DWELL TIME
SITE
NAME
COVERT
VIDEO OUTPUT
Figure 4.5. DISPLAY Setup Screen
Table 4.5. Menu Items in DISPLAY Setup Screen
Enable/disable on-screen-display.
(Channel Name, Video Loss, Status Bar/ Icon)
Set the transparency level of the On Screen Display (OSD) (0~100)
Enable/disable sequential display of video in full screen mode.
Set the dwell time of each, single channel display in sequential display
mode (3~60seconds)
Select a channel to apply the name and covert settings change using the
mouse or the remote control.
Select a channel to apply the following settings using the mouse.
Set the channel name. Press the right square button and set the channel
name and select OK using the mouse.
The name can be made up to 36 characters.
Enable/disable display of the specified video channel in live display.
Select 1280x720 or 1920x1080.
Description
35
Advertisement
Table of Contents
