Subscribe to Our Youtube Channel
Summary of Contents for SFD 77014
- Page 1 77014 / 65041 Submersible Submersible Water Pumps Submersible Water Pumps Water Pumps Automatic Users Manual Carefully read this entire Instruction Manual before using this product...
-
Page 2: Product Description
Please read these operating instructions carefully and ensure they are strictly followed. Please retain these instructions for future reference. 65041 77014 Plastic Dirty Water - Automatic Plastic Clean Water - Automatic PRODUCT DESCRIPTION PRODUCT DESCRIPTION 1. Electrical cable 1. Electrical cable 2. -
Page 3: Saftey Instructions
SAFTEY INSTRUCTIONS k) Reinforce the mounting of the discharge pipe with the use of a pipe clip. Adhere to the maximum immersion depth (See: Technical Please note: Before assembling and putting the Information). The owner (user)of the pump has pump into operation, in all cases read through the the duty to take precautionary measures operating manual. - Page 4 Safety point for your RCCB Please test the instrument before you use it Notice: 1.Insert the plug into the socket 2.Press the “RESET” button. The working indication on light will become red. 3.Press the “T” button. The working indication light should go out.
- Page 5 UTILISATION / RANGE OF APPLICATIONS On silty, sandy or pebbly ground, the pump run must be hung by a rope or chain or situated on a Electric submersible pumps are used in the following suitably wide base plate in order to allow it to work areas: submerged.
- Page 6 GUARANTEE Overloading Protection / Thermal Motor Switch The submersible pump is equipped with a thermal This product has been constructed to high quality motor switch. In the event that the motor becomes standards and is guaranteed for against manufacturing overheated, the motor switch automatically switches faults for a period of 12 months from the data of purchase.
-
Page 7: Troubleshooting Guide
TROUBLESHOOTING GUIDE Problem: Possible Causes: Remedy: The pump switches itself off The water level is too low. Submerge the pump more deeply. because of overheating. (thermal motor switch) Clogged by drawn-in particles - Check and clean the pump. Foreign matter jammed in the pump rotor. -
Page 8: Declaration Of Conformity
Declaration of Conformity We, Importer SFD Ltd BA22 8RT Declare that the product Automatic submersible Water Pumps Complies with the essential health and safety requirements of the following directives: 89/336/EEC – EMC Directive. 73/23/EEC, 93/68/EEC – Low Voltage Directive Standards and technical specifications referred to:...
Need help?
Do you have a question about the 77014 and is the answer not in the manual?
Questions and answers
We have a SFD 65041 pump for our bowls club irrigation. As soon as it is switched on it throws the RCD. I have opened up the pump and can see the wrong. There is a loose blue wire but I cannot see where it goes. Do you have a wiring diagram.