Using Lynx™ D; Aiming System - Datalogic Lynx D User Manual

Hide thumbs Also See for Lynx D:

Table of Contents

USING LYNX™ D

2.1

The Lynx™ D reader uses an intelligent aiming system similar to those on cameras.

By partially pulling the trigger, the aiming system indicates a field of view to be

positioned over the code:

Figure 1 - Aiming System

When you pull the trigger completely a red beam illuminates the code. If the aiming

system is centered and the entire symbology is within the aiming system, you will get

a good read. The field of view changes size as you move the reader closer or farther

away from the code.

Linear barcode

2D Matrix symbol

Figure 2 - Relative Size and Location of Aiming System Pattern

Table of Contents