Writing Cd/Dvds On Dvd Super Multi (Double Layer) Drive Kit - Toshiba Portege M750 User Manual

Turn off the power before you use the eject hole. If the CD/DVD is spinning
when you open the disc tray, the CD/DVD could fly off the spindle and
cause injury.

Writing CD/DVDs on DVD Super Multi (Double Layer) Drive Kit

II
You can use the DVD Super Multi (Double Layer) Drive Kit II to write data to
either CD-R, CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R,
DVD+R (Double Layer), DVD+RW or DVD-RAM discs. TOSHIBA Disc
Creator is provided as writing software with this computer.
■
Please refer to the
of writable CD and DVD discs that can be supported by this computer.
■
Do not turn off the power to the optical disc drive while the computer is
accessing it as this may cause you to lose data.
■
To write data to CD-R/-RW media, use the TOSHIBA Disc Creator
feature that is installed on your computer.
■
When the power of the optical disc drive is off, the disc tray will not
open even if the eject button is pushed. Use the ODD to turn the power
of the optical disc drive on. Please refer to Chapter 5,
When writing information to media using an optical drive, you should
always ensure that you connect the AC adaptor to a live power socket. It is
possible that, if data is written while powered by the battery pack, the write
process may sometimes fail due to low battery power - in these instances
data loss may occur.
User's Manual
Figure 4-27 Manual release with the eject hole
Writable discs, Chapter 2 for details about the types
Operating Basics
Eject hole
Hot keys.
4-37