Automatic Volume Adjustment; Outputting Audio Only; Setting Audio Input - Sharp Aquos LC-32DH57E Operation Manual

Basic adjustment
Audio
Type
Normal Audio stream is output normally.
Selecting this item enables you to adjust the
Audio Description
settings for the visually impaired (see below).
Audio for the hearing impaired is output on the
Hard of Hearing TV speakers by default when the programme
contains audio information.
Audio
Audio Description
Available only when you set "Audio Description" in the
"Type" menu above.
When set to "On", audio for the visually impaired
Speaker
is output from the TV speakers.
When set to "On", audio for the visually impaired
Headphone
is output from the headphone terminal.
Adjust the volume of the speakers or
Volume
headphones.

Automatic volume adjustment

Option
Auto Volume
Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. The Automatic Volume Control (Auto
Volume) reduces this problem by equalizing levels.
Item
Item

Outputting audio only

Option
Audio Only
When listening to music from a music programme, you
can set the TV off and enjoy audio only.
Off Both screen images and audio are output.
On Audio is output without a screen image.

Setting audio input

Option
PC Audio Select
When using the EXT 4 terminal or HDMI 2 terminal, you
must select which terminal uses the AUDIO (R/L) jack for
analogue audio input.
When connecting devices (including a PC) with
DVI/HDMI cable to the HDMI 2 terminal and
HDMI 2
inputting analogue audio signals from the AUDIO
(R/L) jack*.
When connecting a PC to the EXT 4 terminal,
EXT 4 (RGB) and inputting analogue audio signals from the
AUDIO (R/L) jack.
* HDMI signals have priority when the signal includes audio.
NOTE
• You must set this to "EXT 4 (RGB)" when connecting devices
(including a PC) with an HDMI-certified cable to the HDMI 2
terminal. If "HDMI 2" is set, there will be no sound output.
Item
Item
19