Download Print this page

Characteristics; Parts Diagram - The Water Well FS-Z03 User Manual

12- 15kg bullet shape block ice maker

Advertisement

- Unplug the ice maker from the wall socket and drain all the water from
the ice maker if the icemaker is not in use for a long time.
- Clean your ice maker before use, if it has not been used for a long
period, discard the water from water reservoir and clean the ice maker
thoroughly before refilling with water and starting the ice making cycle.
CAUTION: Plastic bags can be dangerous. To avoid danger of
suffocation, keep this bag away from babies and
children.
NOTE: DO NOT use water of an unknown quality in this ice maker.
Always use water from a confirmed drinkable source.

Characteristics

1. The Water Well Ice makers are energy efficient and emit very little
noise.
2. All the components of the Ice Maker are made of high grade materials
and the design is firm and durable quality
3. The Ice Maker will recycle any water that is in the water reservoir, ice
is stored in the ice basket, if this is not used it will melt back into the
water reservoir to start the ice making process again.
4. The Ice Maker has an easy to use touch button display, and you are
able to choose between 3 ice cube sizes, large, medium and small,
5. The Ice Maker can produce ice within 8-12 minutes if the water
temperature is in a temperature range of under 7°C, once the first
batch of ice is produced the water temperature is in the optimum range.
6. The Evaporator Rods can produce 12 bullet ice blocks at a time,
water fills the Ice Bucket and ice is formed around each of the
Evaporator Rods, once the ice has reached the correct size the Ice
Bucket tips over and drains the excess water and the Evaproator Rods
release the ice blockets onto the Ice Shovel, which scoops them into
the Ice Storage Basket. NOTE: please check regularily that no ice
blocks have gotten behind the Ice Bucket as this can cause damage
over time to the Ice Bucket and Ice Motor
7. The Ice Maker comes with a microcomputer control system, which
allows this unit to produce ice faster and easier.
2

Parts Diagram

1. Ice Storage Basket
3. Water Reservoir
5. Water Inlet Pipe
7. Ice Bucket
9. Water Pump
11. Medium Ice Indicator Light
13. Ice Full Indicator Light
15. Clear Viewing Window
17. Large Ice Indicator Light
19. "Stop" Button
1
2
3
11
12
13
M
S
Ice Full
14
Select
START
15
16
2. Ice Scoop
4. Ice Shovel
6. Evaporator Rods
8. Compressor
10. Drain Cap and Plug
12. Small Ice indicator Light
14. "Start" Button
16. Lid
18. Fill Water Indicator Light
20. Ice Size Selection Button
17
18
L
Fill Water
19
STOP
20
4
5
6
7
8
9
10
3

Hide quick links:

Advertisement

loading