Page 1
Note: Installation of this dryer requires basic mechanical and electrical sldlls. It is your responsibility to contact a qualified electrical installer to make the electrical connection. WARNING - POTENTIALFIREAND SHOCKHAZARD • Use onlyrigid or flexible metal 100 nun (4") diameter ductwork for exhausting to the outdoors.
Page 2
Electrical Connection Information Electrical requirements: WARNING: TO REDUCETHE RISK OF FIRE, ELECTRICSHOCK, OR PERSONAL INJURY • The operating vohage (volts), amperage (amps) or wattage (watts) and flequency (Hz) of your (hyer are • DO NOT USE AN EXTENSION CORD indicated on the rating plate located on the upper WITH THIS...
Page 3
ExhaustInformation Exhaust Length WARNING: TO REDUCE THERISK OF FIRE The MAXIMUM AIA_€)'v\LMH_Elength of the exhaust system depends upon the type of duct, number of turns, AND PERSONAL INJURY type of exhaust hood (wall cap) and all conditions noted • Use only metal duct for exhausting dryer to outdoors.
Page 4
Exhaust Information (cont.) Insulation • I)uclwork which runs through an unheated area or is near an air-conditioning duct should be insulated to reduce condensation and lint buildup. Organization Parts Available From Local Service • Rigid Metal Duct Components • Flexible Metal Duct Components WX8X64 Kit WX8X75 2.1 m (7') Aluminum...
This manual is also suitable for:
Disr473cg2wwDisr473dgdwwDisr473dg2wwDisr473cgawwDisr333fgcwwDisr473cg6ww...
Show all