Evertune ET001 User Manual

Guitar with evertune bridge

Hide thumbs

page of 4

/ 4
Bookmarks

Quick Links

Download this manual

Enlarged version

ET001

USER MANUAL

Congratulations on purchasing a guitar with

the EverTune bridge. EverTune allows players

to focus continuously on their inspiration

while holding the guitar in tune from the ﬁrst

to the last note no matter what. Please read

this short instruction manual before using the

EverTune the ﬁrst time. And if there are still

questions after reading this manual, please

refer to our setup page online at

evertune.com/setupfaq. Also feel free to

and we will respond promptly.

So What is EverTune?

EverTune is an all passive system that is without batteries and

is maintenance free. It is completely invisible. Once setup by

the player, the string will just stay in tune, through temperature

changes, any size and amount of bends, any ﬁngering

technique, any picking intensity, and any amount of string

stretching. And if one string breaks, the others stay perfectly in

tune, making EverTune the perfect guitar for all studio and live

environments.

Activating Each

STEP 1

EverTune Saddle

For an EverTune saddle to be active, it must be placed in the

active zone by the player. To do this, loosen the Low E tuning

peg until the string is slack. Now pluck the note and tighten

the tuning peg (Fig. 1). Keep plucking the note and tightening

the tuning peg and listen

until the note stays constant

as in the Chart below. When

the note stays constant, the

saddle has entered Zone 2,

EverTune's active zone, which

we also call 'the sweet spot' .

��

Fig. 1

Before Zone 2, the pitch of the note goes up with each turn of

the tuning peg, exactly like a conventional guitar. EverTune is

inactive here. When we enter Zone 2, the pitch of the note stays

constant and EverTune is active here. When we keep tightening

the tuning peg we will eventually leave Zone 2 and the pitch of

the note will start rising again. EverTune is only active in Zone

2, so make sure every saddle is active (in Zone 2) before tuning

and playing. [To see more on Zone 2 and The EverTune system

check out evertune.com/setupfaq].

��

Need help?

Do you have a question about the ET001 and is the answer not in the manual?

Questions and answers

Summary of Contents for Evertune ET001

Page 1 Activating Each STEP 1 EverTune Saddle For an EverTune saddle to be active, it must be placed in the USER MANUAL active zone by the player. To do this, loosen the Low E tuning peg until the string is slack. Now pluck the note and tighten the tuning peg (Fig.
Page 2 Tuning with the Hex STEP 2 �� Note: On a guitar with EverTune, ALL the tuning is done with the � EverTune hex key at the bridge (Fig. 2). The tuning pegs at the �� headstock are only used to put each saddle into Zone 2, and to ��...
Page 3 Then the intonation screw will always be easy to turn. �� Intonating is great with EverTune because it is so easy to do and �� can be done while the string is at full tension, and the string will ��...
Page 4 Checking Tune manufacturing). EverTune holds the string in tune for the life of the string. In a Changing Gauges and Alternate studio environment, check the tune once per day. Sometimes...