Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Nel-Tech Labs Messager USBi
- Page 1 Messager USBi Nel-Tech Labs, Inc. Installation & User Manual...
-
Page 3: Important Notes
Warranty & FCC ........................Introduction: The Messager USBi is a state-of-the-art digital audio playback device designed to provide a continuous-play audio source for message-on-hold, background music, or any other audio application where high-quality audio playback is required. Messages are transferred from standard USB flash drives to internal NAND Flash memory. - Page 4 Messager USBi Layout Summary Front of Unit SPEAKER - The SPEAKER switch can be turned ON and OFF to monitor audio playback. The switch has no effect on the audio output connections on the rear of the unit. Switch should normally be kept OFF.
- Page 5 Installation: The Messager USBi should be installed using the following steps: Step 1: Wall or shelf mount the unit. Screws and rubber feet are supplied in the accessory kit. Step 2: If connecting to an amplifier make sure it is turned OFF for this part of the installation.
-
Page 6: Troubleshooting
Step 3: Remove the USB flash drive from the computer. Step 4: Plug (hot-swap) the USB flash drive into the Messager USBi while power is ON to load audio. The Status LED will SLOW BLINK while audio is being loaded to the internal memory. A standard MOH production will take about 15 to 20 seconds to load. -
Page 7: Limited Warranty
In the event that the product serial number is missing or has been tampered with in any way, the foregoing warranty is void and without effect and Nel-Tech Labs shall have no liability whatsoever on account of defects to such product. - Page 8 Nel-Tech Labs, Inc. 4 Ash Street Extension Derry, NH 03038 1.603.425.1096 www.nel-techlabs.com Rev. 04/12 Copyright © 1984 - 2012 by Nel-Tech Labs, Inc.
Need help?
Do you have a question about the Messager USBi and is the answer not in the manual?
Questions and answers