Carrier TC-PHP Owner's Manual page 25

PROGRAMMING THE THERMOSTAT
10. To change the minutes, press the start time button on the bottom of the
screen again. You will see the minutes in 8:00 AM flashing on the screen.
Press the up or down button and stop on the desired time.
11. To change the start time for period 3 (P3), press the period button at the
bottom of the screen three times. This displays the information for period 3,
with P3 flashing on the display.
12. You will see the hours in 5:00 PM flashing on the screen. Press the up or
down button and stop on the desired time.
13. To change the minutes, press the start time button on the bottom of the
screen again. You will see the minutes in 5:00 PM flashing on the screen.
Press the up or down button and stop on the desired time.
14. To change the start time for period 4 (P4), press the period button at the
bottom of the screen repeatedly. This displays the information for period 4,
with P4 flashing on the display.
15. You will see the hours in 10:00 PM flashing on the screen. Press the up or
down button and stop on the desired time.
16. To change the minutes, press the start time button on the bottom of the
screen again. You will see the minutes in 10:00 PM flashing on the screen.
Press the up or down button and stop on the desired time.
23