Haier TFT L31C1180 Owner's Manual page 24

grayed out if there are no MP3 files
in the current folder.
Start Slide Show:
•
Show mode.
Rotate Photo:
•
picture. (0/90/180/270)
Back to Upper Folder:
•
to the upper folder.
Back to Root Folder:
•
root folder.
Back To Browser:
•
Browser mode. (Photo page with
control menu.)
Exit:
• Exit JPEG Viewer and return
to original source. (Browser with
Control menu.)
[MP3 MusicBox]
ListInfoBar (at the bottom):
•
This part contains play list
information such as: "Current
Directory", "Total File(s)", "Total
Folder(s)", "Current Item" in current
directory and Key Help Bar.
PlayList (on the right side):
•
This part contains MP3 music files.
ControlPanel (on the left
•
side):
Bass, Treble, Balance, Volume:
Adjust the audio tone.
Mute Screen: This provides
an option for enabling (On) or
disabling (Off) auto backlight-
off feature while playing MP3
media. The option is only avaliable
in MP3 media player interface.
After setting to On, the backlight
will turn off automatically after
10 seconds if no key is pressed.
Press any key except POWER,
TV backlight will turn on again.
Preset: Resetting all MP3
options to the factory default.
Exit: Exit MP3MusicBox
Enter Slide
Rotate selected
Return
Return to
Return to
interface.
[Time Shift] – The feature allows
the viewer to pause and record the
currently watched digital program
(ATSC or QAM) and resume to the
point where it was paused. Plug in
the USB storage device to activate
the Time Shift function in the
Feature menu.
Note:
– Formatting a USB 2.0 storage
device will be needed. Save your
original data before formatting.
All the data stored in the
USB device will be erased
after formatting.
– Sleep timer will be suspended if
it had been set before activating
the Time Shift function.
USB Drive Storage Format:
•
Select to format the USB device and
allocate the amount of space for the
Time Shift function.
Note:
• The format process will take at least
2 minutes. Pleasedo not turn off the
power or remove the USB device
during formatting.
• During formatting, a speed test will
be done on the USB device. If it fails,
it means the USB device may not
support the Time Shift function.
Start Time Shift Recording:
•
Select to start the Time Shift
function.
Note:
• Please do not unplug the USB
storage device when the Time Shift
function is activated.
• Approximately 4GB of memory
buffers about offer 180 minutes
22